I picked up a '99 XJ a few months back but did not notice how bad the exhaust is. It basically needs the entire exhaust system replaced. I figured just replace 100% and start new. My struggle has been finding a good header that will fit around the '99 intake manifold since Banks does not offer one for that year. My questions are...
Is a 99' intake manifold design the same as 2000-01? If so, the newer header design should bolt on, correct?
Does anyone know the pipe diameter of the 2000-01 head/y-pipe? I have heard its double 2" into single 2.5" outlet, is this correct?
I would not be getting any pre-cats and plan to be running 2.5" pipe all the way out since engine mods are in the future. It is also getting lifted which should fix the front driveshaft/exhaust pipe clearance issues.
Is a 99' intake manifold design the same as 2000-01? If so, the newer header design should bolt on, correct?
Does anyone know the pipe diameter of the 2000-01 head/y-pipe? I have heard its double 2" into single 2.5" outlet, is this correct?
I would not be getting any pre-cats and plan to be running 2.5" pipe all the way out since engine mods are in the future. It is also getting lifted which should fix the front driveshaft/exhaust pipe clearance issues.