freerider15
NAXJA Forum User
- Location
- FoCo, Crawlorado
I've got 2 Ballistic Joints that I won't be using.
They were only used for mock-up, never run.
Joints are 2.63" joints, with 7/8" - 14 TPI shank. One RH thread and one LH thread.
I know I have a jam nut for one, and i'm 99% sure I have a jamnut for the other.
$100 for the pair.
They were only used for mock-up, never run.
Joints are 2.63" joints, with 7/8" - 14 TPI shank. One RH thread and one LH thread.
I know I have a jam nut for one, and i'm 99% sure I have a jamnut for the other.
$100 for the pair.
