A Satria
NAXJA Forum User
- Location
- Jakarta, INDONESIA
Hi guys,
My name is Andhi from Jakarta, INDONESIA
Jakarta is about ONLY 22 Hours Flying from Los Angeles (I went to school there...), North of Australia, South of Singapore.
We had TSUNAME Tragedy 2 years ago....
Existing Spec :
STANDARD 1997 XJ from Factory Rusted and beaten UP :rattle:
Current Modifications :
Need to purchase most of the parts from STATES (Stroker Kit, Engine, Acessories, lockers, Axles, Walker Evans Racing Coil-Over Shocks).
Need to shipped all of the parts by Sea Freight +7 weeks (or Air Freight +2 weeks) everything from the states to Jakarts, Indonesia
Need to FABRICATE the Lower and Upper mounting for the Front Dual Rate Coil Over Shocks.
Need to FABRICATE the Lower and Upper mounting for the Rear Dual Rate Coil Over Shocks.
Need to FABRICATE the Lower Pararel Link and Upper Triangulated Link for the Rear Axle.
Need to install all of the Spare-Parts and Fine-Tuning
Need to purchase additional SPARE-PARTS and others small items
This all is what we call challenge (if not impossible) and FUN (I mean lots of it....!!!) :roll:
NO, we are not trying to be SMART or to SHOW-UP our capabilities, but rather to get help, ideas and guidance from all of you guys in helping us to built and complete this HUMMBLE XJ in Indonesia.
We know that most of you guys for sure have seen a better XJ than what we are about to built,
My other links http://www.pirate4x4.com/forum/archive/index.php/t-315161.html
OHHHHHHH :callme: , well, maybe I am dreaming a little bit too much. Anyway, I will start posting parts that already here and some progress on the FABRICATION.
I wished I were in the states, where I have access to spare parts, technical expertise, Friends, etc...... rather than be here by ourselves.
NOW don't you guys feel so lucky just being in the STATES ???:wave1:
PS: Is there any way that I can UPLOAD Picture please ???
My name is Andhi from Jakarta, INDONESIA
Jakarta is about ONLY 22 Hours Flying from Los Angeles (I went to school there...), North of Australia, South of Singapore.
We had TSUNAME Tragedy 2 years ago....
Existing Spec :
STANDARD 1997 XJ from Factory Rusted and beaten UP :rattle:
Current Modifications :
- Engine : Stroker Kit to 4.5 Liter w Piggy Back (done)
- Already DYNOED
- Axle Front/Rear : Standard with addition of Locker
- Suspension Front : Walker Evans Coil Over Shocks (Dual rate) 10 Inch Travel
- Get rid of existing shocks and coils !!
- New lower and upper mounting for coil over
- Suspension Front : Walker Evans Coil Over Shocks (Dual rate) 10 Inch Travel
- Get rid of existing shocks and leaf spring !!
- New pararel lower link, triangulated upper link
- New lower and upper mounting for coil over
- Coils from King Shocks King-Shocks Coils (Dual Rate Coil Over Set-Up):
- Front : Lower 12" Stiff Coils rate???, Upper 8" Soft Coils rate ???, Primary Rate ???, Secondary Rate
- Rear : Lower 12" Stiff Coils rate???, Upper 8" Soft Coils rate ???, Primary Rate ???, Secondary Rate
- New Paint, Solid Black (Done)
- Ride Height :
- WORKING-DAY : lowered 4"
- WEEK-END : Raised 3"
- Wheels & Tires (Done)
- Front, 8.5x18" on Toyo 255x55x18
- Rear, 9.5x18" on Toyo 275x55x18
- Transfer Case : Standard
- Transmission : Automatic AW-4
- Interior : ALL LEATHER colour TAN (Done)
- SoundSystem : New, with I-POD Connector (Done)
- SLEEPER Look during WORKING-DAY
- LOWERED 4" from standard,
- 18" AMG Wheel with 275x55x18 tires
- Use it to work and to beat-up those people who rides in their luxury sedans and "HATE" Jeeps, and who thinks that JEEP is just for off-road and slow !!!
- So, Have some RESPECT for JEEP !!!
- AGRESSIVE OFF-ROAD during WEEK-END
- RAISED 3" from standard,
- 17" Walker Evans Wheel with BFG 31" All-Terrain
- It is just a matter up SETTING-UP the Spring COLLAR Retainer to lower and raised the Body of the XJ
- and, enjoy my hobby as a week-end off-roader with my family.
- If it is still NOT fast enough :
- I still have my old PAXTON SN-2000 with 4 different impeller to go into the housing.
- The standard will put 5-psi around 4000 engine RPM.
- The MX impeller will put 9PSI around 4000 engine RPM.
Need to purchase most of the parts from STATES (Stroker Kit, Engine, Acessories, lockers, Axles, Walker Evans Racing Coil-Over Shocks).
Need to shipped all of the parts by Sea Freight +7 weeks (or Air Freight +2 weeks) everything from the states to Jakarts, Indonesia
Need to FABRICATE the Lower and Upper mounting for the Front Dual Rate Coil Over Shocks.
Need to FABRICATE the Lower and Upper mounting for the Rear Dual Rate Coil Over Shocks.
Need to FABRICATE the Lower Pararel Link and Upper Triangulated Link for the Rear Axle.
Need to install all of the Spare-Parts and Fine-Tuning
Need to purchase additional SPARE-PARTS and others small items
This all is what we call challenge (if not impossible) and FUN (I mean lots of it....!!!) :roll:
NO, we are not trying to be SMART or to SHOW-UP our capabilities, but rather to get help, ideas and guidance from all of you guys in helping us to built and complete this HUMMBLE XJ in Indonesia.
We know that most of you guys for sure have seen a better XJ than what we are about to built,
My other links http://www.pirate4x4.com/forum/archive/index.php/t-315161.html
OHHHHHHH :callme: , well, maybe I am dreaming a little bit too much. Anyway, I will start posting parts that already here and some progress on the FABRICATION.
I wished I were in the states, where I have access to spare parts, technical expertise, Friends, etc...... rather than be here by ourselves.
NOW don't you guys feel so lucky just being in the STATES ???:wave1:
PS: Is there any way that I can UPLOAD Picture please ???
Last edited:
