1997 XJ 37"s D44's

wht97xj

NAXJA Forum User
Location
bakersfield
1997 (salvaged title) Jeep Cherokee 4.0 4x4 Automatic
FRONT LIFT
Rubicon Express Long Arm with 7.5 coils and 1.5 spacer
RE Track Bar mount with custom Trac Bar
REAR LIFT
6.5" leaf pack with 5/8" steel block built into pack
1.5" shackles
AXLES
Front, Wagoneer (cheif model 65" wms) 4.88 gears with lockrite
and warn hubs, high steer with drill and tap hydro assist, heim steering
and hydro assist skid.
Rear, Wagoneer 4.88 gears with lockrite and disc brakes.
Transfercase, Np231 with AA sye and tom woods shaft
Tires 37" MTRs (old style) with 3 or 4 spares (not for sale seperatly)
Has roll cage, and winch bumper with winch (warn 8000)
Reason for salvage is it was hit in the a pilliar in accedent but
since i bought to build as a trail car was no issue. pulled out the pilliar
welded on door hinge and hung a new door and fender.
Jeep has about 220k miles not sure of exact.
has older transmission in the vehicle but is not correct for application it is an aw4
but not the right year, we threw it in for some trail runs few years back
and ended up leaving it since it worked fine.. it does however trigger the check engine light
to come on with a misc transmission fault code. correct year model transmission is available
the sale to the correct buyer.. this is a proven car, not a looker by any means but will take
you where ever you want to go.. driven round trip and wheeled rubicon, dusy, johnson valley hammer trails, death valley,
terra del sol, and many many other trails/locations.. I am on the fence still about getting rid of this car, but
for the right offer will let go. i have gotten far to busy at work and home for this car to have the
attention that it needs... i will start at 7,000$ or trade for?

i will post up more pic's for now this is what i have with me here at work..

IMG078_zps0531de2e.jpg
 
Aj, I may have gotten a deal worked out with another local wheeler in partaial trade but will keep you posted, if you want a bumper grab some 1/8" and 1/4" and i have all the patterns and templates to cut from
 
Bump with pics, will get more of interror, it is grey/black interrior, started as a tan car but when i built it the tan just didnt work for me so it got all NEW factory interrior.. the back hatch it top half an older model hatch with the bottom a comanche tailgate.. still have factory hatch with all hardware, i just perfered the tail gate for wheelin trips and for a trail workbench!!
 
Back
Top