dennis461
NAXJA Forum User
- Location
- Waterford Township, NJ
Replaced my AW4 ( I think) front seal today and have a question.
There is a thin sheet metal cover on the bottom half of the bell housing.
It goes on after bolting up the torque converter to the flex plate.
It has three small bolts holding it on and at the bottom two very large hardened steel through bolts and nut.
They look much too large for just holding that plate on.
Is my 1991 4.0l auto missing some parts?
There is a thin sheet metal cover on the bottom half of the bell housing.
It goes on after bolting up the torque converter to the flex plate.
It has three small bolts holding it on and at the bottom two very large hardened steel through bolts and nut.
They look much too large for just holding that plate on.
Is my 1991 4.0l auto missing some parts?