trippled
NAXJA Forum User
- Location
- colorado springs, co
Sweet! Really doesn't look that tall.looks like you've been making some serious progress now.
1991 Comanche Build(AKA the POS Jeep)
- Thread starter POSJ
- Start date
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
That's a cool little case there at the lower right in this pic.
Came with the jeep when I bought it, it's convenient for spare parts.
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Thanks, it's been a long time coming. In the beginning I said it would take years lol, still have a ton to do.
- Location
- Camden, SC
I'd be interested in more info on what you did for the coilover mounts on the front. I'm going to be doing that on another build soon. Also I recently broke a 35 spline shaft in my 60 rear. 4.0 auto 203/205 in low and bound up good.... 
:bawl:
:bawl:
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
I'd be interested in more info on what you did for the coilover mounts on the front. I'm going to be doing that on another build soon. Also I recently broke a 35 spline shaft in my 60 rear. 4.0 auto 203/205 in low and bound up good....
They are the Ballistic fab towers, so far just welded to stuff you can see. Once I get the front cage done they’ll get tied into it all. Only thing I would change about it so far is that I would like them 12” high instead of 10”. Maybe if you contact them they could cut them a little higher.
- Location
- Camden, SC
That is good to know. Do I see a space off from the frame? Looks all tied to track bar too.
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Yeah I have a Superduty front, so it is stupid wide and to manage the packaging of everything and to get the coilovers vertical I stepped it off of the frame with some 2x4 box. Here are the two sides.
If you need more pictures let me know, but I’ve already sprayed underbody coating on it.
- Location
- Camden, SC
Ok that explains that. I looked and Barns has towers that are 14" but not 12" and the ballistic ones are 10".
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Artec has some that are a little shy of 13.5” and then you could just mount the axle side higher.
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Crappy picture, but you get the point...2003 L20
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Rear gears are set up, no pictures, imagine 5.38's in a D60 with some yellow paint in a decent pattern.
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
I can picture it now. Nice!
