89xjdd
NAXJA Forum User
- Location
- Marsing ID
I did the injector swap to 19# Ford racing injectors. Went to upgrade the fuel rail and regulator to the 1991 - 1995 model and it is not even close to bolting up and the fuel lines are different. Has anyone done this swap and what am I doing wrong. According to the chart I need to get my rail pressure up to 49psi for the 19#'s to flow the same. It is running ok without it seems like a little loss of top end but runs a lot smoother. Any help would be great. Thanks This is my first post so I hope this is in the right place.