Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
I dont like how they mounted it. The plate running off the side of the shotty seems cheap. I would rather have the taser mount directly off the picatinny rail.
Thanks everyone for the replies.
I went all out, IMO, and picked up this http://www.sears.com/shc/s/p_10153_12605_00942276000P?prdNo=4&blockNo=4&blockType=G4.
Seemed to have good reviews online. Runs off compressed air so no manual pumping. I take care of four cars/trucks so I think after a...
I just finished up a complete brake job on an older Buick. After doing the typical open bleed valve, push pedal, close valve trick for bleeding the brakes Im looking to pick up something to make that part of the job easier.
What do you use/recommend? Speed bleed valves or Vacuum Pumps? I would...
Im going to be performing a brake system overhaul on a family friends 1992 Buick Park Ave. Im wondering what the minimum allowed rotor thickness is? I would like to have the rotors resurfaced vs. having them pay for new if its not needed.
I tried the local Buick dealer but they did not have a...
I unplugged the compressor over a year ago and the E-Fan works without a problem. Mine is a 1996 if that helps. I can kick the HVAC controls to Defrost and the E-Fan will kick on as normal. I use this to "manual" override the E-Fan when wheeling to control engine temps and promote cool down...
A drop bracket on the frame side would help and/or adjusting the axle side will get it dialed in.
However, if you plan to go OTK I would wait to adjust the trac-bar till after you do.
I went with a CSF 2674, Brass/Copper all metal, 3 row.
It was 93* with 70% humidty yesterday and she would not go past 210* sitting in traffic. Well worth the money in my opinion.
The shackle from IRO is made by Rough Country.
http://www.ironrockoffroad.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=IROR&Product_Code=IR-X_1LS&Category_Code=XSP
I have the IRO BPE front and rear. No problems with the shocks or the bushings. I have yet to get to a point where bushing binding limits suspension travel. I could care less about rotating the rears 90* but thats just me.
Setup: Hybrid 4.5" RE lift , adjustable upper and lowers, 33's, blah...