jeepcherokeethng
NAXJA Forum User
- Location
- Salisbury, NC
Ok this is what i found in the aw4 troubleshout in 1996, the AW4 transmission added a front input speed sensor and the rear speed sensor changed from a 1-pulse/rev reed sensor to a 4-pulse/rev magnetic sensor. For this reason, if you are planning a swap you should try to keep the same year wiring harness and computer.
Ive have a 92-93 wiring harness and tcu but a newer styler transmission. Trying to figure the best possable solution. If anyone has done this let me know.
Could get the newer computer and change the older style tcu connecter to the new one by changing the pins and connector and wiring up the input speed sensor.
Or can you modify the newer style output speed sensor or modify the reluctor ring on the output shaft.
Ive have a 92-93 wiring harness and tcu but a newer styler transmission. Trying to figure the best possable solution. If anyone has done this let me know.
Could get the newer computer and change the older style tcu connecter to the new one by changing the pins and connector and wiring up the input speed sensor.
Or can you modify the newer style output speed sensor or modify the reluctor ring on the output shaft.