chemsolder
NAXJA Forum User
- Location
- Texas
Yes I searched just couldn't find a ballpark length. Lot of back and forth measure first...I just want close for street driving/fine tuining cause wife dd's it more than her SUV.
Original plan was a 2" budget boost for the time being, that flew out the door yesterday. Wound up with a pair of 5.5" springs a transfer case with a sye and a driveshaft. I plan on bpe eliminators and stud eliminators, hoping to run the same shock front and rear if possible. Ideas on ballpark length?
The rear will be lifted with a 2" shackle and a bastard pack, possibly a shacle relocation bracket too. I need to finish assembling parts and get it all done, hoping to come up with an off the autostore shelf shock option, that way I can fine tune everything before dropping $80a shock. Ideas are welcome!
Original plan was a 2" budget boost for the time being, that flew out the door yesterday. Wound up with a pair of 5.5" springs a transfer case with a sye and a driveshaft. I plan on bpe eliminators and stud eliminators, hoping to run the same shock front and rear if possible. Ideas on ballpark length?
The rear will be lifted with a 2" shackle and a bastard pack, possibly a shacle relocation bracket too. I need to finish assembling parts and get it all done, hoping to come up with an off the autostore shelf shock option, that way I can fine tune everything before dropping $80a shock. Ideas are welcome!