Need recommendations for raised D44 lower shock mounts

[MoFo]

I have been running an '87 XJ Dana 44 rear axle for several years now. I am tired of bumping the lower shock mounts on rocks and want to raise them. I realize I will need to buy shorter shocks. Can somebody recommend a source for ready to weld on, raised lower shock mounts?

 

[foxwar71]

Why not just cut the stock ones down and use them? That's what I did when I swapped an 8.8 in my old DD. I lifted it like 2.5" and raised the mounts so I could still run stock shocks.

 

[Brent T]

http://zoneoffroad.com/product-acc?ki=90&gr=

 

[xjtrailrider]

I always cut the stock ones down, all my XJ's are done like this even the stockers.

 

[steveareno]

JKS; strong. That's what I did.
jksmfg.com

 

[Outlander560]

i used jks as well....but IMHO their cheaper ways of doing it...75 bucks for 2 tabs and some hard ware is a bit ridiculous....but ya live and learn...

 

[ktm racer 419]

+

=

 

[xjtrailrider]

Not great pics but this is what mine look like. They are the stock mounts cut down and the skid plated underneath with 1/4" flat bar