Well, we know you're da man Ryan, but...
There was NO way the c-clips would fit into the slots in the couplers. I know that others have also had this problem. In fact, I did my install at Remi's house, and he had told me before we started that we would have to grind the clips. And sure enough... He had to do the same thing when he put a No-slip in his old XJ.
And the spider and side gears would not pop out. So Remi checked some old threads on his computer. And what we actually did was to turn the yoke by hand. But when I did the No-slip in the D30, I turned one of the shafts by hand.
Granted, these steps might not always be needed. But it sures helps to know these things beforehand.