RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
I finally get to p/u my block today so I can get started, I talked to Russ the other day about where my heads and intake are and they're about another week out!
Here's my parts list............
2000 XJ block - decked, bored .030" over, and align-bored w/ ARP Main Stud kit
Clearwater Cylinder Head improved 0331 head - Bishop-Buehl port/polish/62cc chambers/LS1 intake valves/port match w/ ARP head bolts
2000 XJ intake manifold - Bishop-Buehl port match/bore TB 62mm
BBK 62mm throttle body
Banks Revolver header
Hesco water pump
Comp Cams 68-232-4 camshaft - Lift(.460" Int/.476" Ex) Duration(250 Int/256 Ex)
Rollmaster billet steel(crankgear induction hardened) double roller timing set w/ nine position crank gear (+8 to -8 degrees)
Cam bolt with custom length thrust pin(no spring), shooting for .008" of end play
Sealer Power lifters
HarlandSharp 1.6 roller rockers w/ ARP rocker studs
Scat stroker crankshaft
Scat/Bishop-Buehl Chromoly 6.125" connecting rods bushed for free-floating Chevy wrist pins
Auto Tec 4032 Forged pistons/ -22cc D-dish w/ Chevy wrist pins and 1.385" wrist pin height
Sealed Power Moly piston rings
Clevite main/rod/cam bearings
FelPro gaskets/seals
ARP flex plate bolts
Brown Dog motor mounts
Crankshaft, connecting rods, pistons, wrist pins, flex plate, and harmonic balancer all balanced
Reciprocating parts - connecting rods, pistons, and wrist pins I weight matched to within .25grams across all 6 set combo's
Custom 2-1/2" header to downpipe adapter w/ O2 bung for my LM-2 A/F meter
Here's my parts list............
2000 XJ block - decked, bored .030" over, and align-bored w/ ARP Main Stud kit
Clearwater Cylinder Head improved 0331 head - Bishop-Buehl port/polish/62cc chambers/LS1 intake valves/port match w/ ARP head bolts
2000 XJ intake manifold - Bishop-Buehl port match/bore TB 62mm
BBK 62mm throttle body
Banks Revolver header
Hesco water pump
Comp Cams 68-232-4 camshaft - Lift(.460" Int/.476" Ex) Duration(250 Int/256 Ex)
Rollmaster billet steel(crankgear induction hardened) double roller timing set w/ nine position crank gear (+8 to -8 degrees)
Cam bolt with custom length thrust pin(no spring), shooting for .008" of end play
Sealer Power lifters
HarlandSharp 1.6 roller rockers w/ ARP rocker studs
Scat stroker crankshaft
Scat/Bishop-Buehl Chromoly 6.125" connecting rods bushed for free-floating Chevy wrist pins
Auto Tec 4032 Forged pistons/ -22cc D-dish w/ Chevy wrist pins and 1.385" wrist pin height
Sealed Power Moly piston rings
Clevite main/rod/cam bearings
FelPro gaskets/seals
ARP flex plate bolts
Brown Dog motor mounts
Crankshaft, connecting rods, pistons, wrist pins, flex plate, and harmonic balancer all balanced
Reciprocating parts - connecting rods, pistons, and wrist pins I weight matched to within .25grams across all 6 set combo's
Custom 2-1/2" header to downpipe adapter w/ O2 bung for my LM-2 A/F meter