Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Well Rock Auto sent one e-coated black drum and one bare drum. So sent back & they sent another bare drum. Finally got the other one from Amazon.
While I was waiting on parts, I noticed a very slight seepage from passenger wheel seal. She's only put around 3K miles so would surely get worse.
So decided to tear it apart and install new seal. Didn't like the seal surface on axle even after polishing with emery cloth,so got Richmond cromo shaft.
I don't know why I didn't install new shaft during rear axle rebuild. Race was in axle good and tight.
Clamshell bearing remover sure is nice, no grinding, can reuse bearing & retainer, but went with new Timpken.
Also noticed the tweeter sail panel were rubbing A pillar trim. Fortunately the 3D printed housing was softer than A pillar plastic so didn't damage the factory trim. @GJeep told me that JBL tweeters would fit in factory Infinity sail panels with bit of dremel work.