Patrick dimel
NAXJA Forum User
When the relay is jumped thing only thing that happens is the relay clicks.THIS^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When the relay is jumped thing only thing that happens is the relay clicks.THIS^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Ok I will check that. Thank youwe need to verify if there is 12 volts at the fuel pump connector while priming in order to isolate this issue.
I have no power to the the connector.we need to verify if there is 12 volts at the fuel pump connector while priming in order to isolate this issue.
I will definitely get to checking that. Thank you for all the input!If you have 30 and 87 jumpered and you do not have +12 volts (to a known good ground), then the wire has failed!!!!!!!!!!!!!
To add to the issues I now do not have power at 30If you have 30 and 87 jumpered and you do not have +12 volts (to a known good ground), then the wire has failed!!!!!!!!!!!!!
So is the best option to just get a new one?30 is fed directly from a fuse in the PDC
I don't know if they are even available?So is the best option to just get a new one?
Gotcha thank youMain fuse block (PDC) not a PCM!