From JCR's websight:
JEEP CHEROKEE CB MOUNT
INSTALLTION INSTRUCTIONS
• 10mm Socket
• Socket Wrench
• Socket extension, Recommended
TOOLS NEEDED
Please read the mounting instructions below
carefully before attempting to install.
Thank you for purchasing your new CB Mount from JcrOffroad!
Checkout our website,
www.jcroffroad.com for more deals and
other great off-road products. Be sure to rate and review our product
online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
Using the 10mm Socket, remove the two top mounting bolts from your tail light housings.
Note: The photos here are of a ’97-’01 but the install is the same on ’84-’96 XJ’s. The only
difference is the bolts are in slightly different locations.
Loosen the remaining bolts.
Pull the taillight housing away from the Jeep slightly.
Slide the XJ CB Mount as shown between the taillight housing and the body of the XJ until the
holes line up with the bolt holes in the taillight housings.
1
2
3
4
Follow the install instructions included with your CB Antenna for installing the antenna to
our mount.
6
Using the 10mm Socket again, screw back in the two bolts that you removed until tight, and
tighten the lower bolt.
5
It does go between the tail light housing and the body. I"m not sure how well it will seal.