Jamescad04
NAXJA Forum User
- Location
- Charlotte, North Carolina
Any info on the s-10's yet?
XJ Ultimate SUPERSTORE - accepting parts requests
- Thread starter KPTHEMP
- Start date
Any info on the s-10's yet?
I'll be hitting this place up first thing tomorrow morning, pulling a few parts, taking some pics and getting quotes.
also in reference to the following...
im just messing with you but by your misspelled "biege" do you mean tan or gray interior ? because by definition Beige is " light grayish brown or yellowish brown to grayish yellow."
also in reference to the following...
wont the switch fit a few years regardless of engine or tranny ?
im just messing with you but by your misspelled "biege" do you mean tan or gray interior ? because by definition Beige is " light grayish brown or yellowish brown to grayish yellow."
i'll be looking for this
yeah i think there was a few, the tailgate is gonna be like $50, what color you looking for ? shipping would be killer though, you seriously want one ?
Last edited:
Jamescad04
NAXJA Forum User
- Location
- Charlotte, North Carolina
Mostly just need the handle, guts and latching mechanism. Mines bad I have a tailgate but the innards don't work. Don't care about the color of the handle just how it operates if there are any that operate smoothly I would be interested. I also need the door seals and window seals for the door windows if they are in good condition. I don't have a vent window they are full windows.
OlTanNBrown
NAXJA Forum User
- Location
- Midland City, Al.
OK, Give me a break! I know what you are saying. I used to specify Tan & indeed have some tan parts in the Jeep now. However, I discovered that the Tan is a slightly more Brown color, perhaps more Red in it than what I had originally so I figured it must be Beige which is a lighter & as you indicated more yelowish color. I think my driver seat belt is actually Tan as I replaced it some time ago & the passenger is still the original lighter color as noted for the console. Regarding the switch. I understand that to make an exact match the 85 will only take an 84 (mine was a very early 85), an 85, & some 86's. I understand the wiring is different & if you use a different year you have to figure out all the wiring & change the connector. That is what I have been told. Otherwise, they are very close with only very subtle differences until they made the big change what 93 0r 97 something like that.
Thanks
Thanks
OlTanNBrown
NAXJA Forum User
- Location
- Midland City, Al.
I want one, but you are right. Shipping is the killer. Thus far everything I have located has had a ridiculous price for shipping & I am no were near Ft. Campbell. I sure do wish I was for this anyway. Thus far I haven't found anything reasonable on the shipping, so unless I do the tailgate is needed, but a toughy. Mine is that Beige color with hand painted Gold pinstripes. I don't expect to find that so I suppose a lighter color would be the next best bet.
ok, no prob, theres a donor there i have in mind for you, ill snap some pics and get back to you.
i dont think shipping will be too bad for you, i was more talking about shipping leaf springs for the other guy
trail rate this
NAXJA Forum User
- Location
- Cape Coral, FL
Your going to have to get the whole tail gate.
Bosco and I went up there on Friday. I was depressed seeing all those perfectly good Jeeps. We wanted the 4.10 gear from the 86 XJ. He told us we had to buy the whole axle.
We left with nothing and went to PAP in Nashville.
ok just got back from another awesome parts run. i picked up another header panel (FOR SALE), driver door, engine wiring harness and ecu, mirror, tailgate, infinity speakers and amp all for about $200, i also took alot more PICS - CLICK HERE and got some more prices...
with factory high mounted Alternator !
click on the photo link and browse for a belt diagram of the same
picked this header panel up as an extra if anyone is looking for one $65 (yeah it was a bit more expensive this time)
more pricing...
tailgate $39 any size
floor mats $2 each
a/c switch $13
console $22
console lid $8
hood $39
fender $55 kinda crazy, but hey if its the right color
master cylinder and booster $38
hatch shocks $8 each
drive shafts $23 each
also i can get heated power leather seats from zj's for $200 complete set(2 front and rear 60/40) theres like 2 or 3 in excellent condition
KP
$27 each +$4 core
well i guess there was only one early model and its stipped to the bare cab now, sorry
$2 each
well check this out, your gonna love this idea, its postal...
with factory high mounted Alternator !
click on the photo link and browse for a belt diagram of the same
look through the pics and let me know
picked this header panel up as an extra if anyone is looking for one $65 (yeah it was a bit more expensive this time)
more pricing...
tailgate $39 any size
floor mats $2 each
a/c switch $13
console $22
console lid $8
hood $39
fender $55 kinda crazy, but hey if its the right color
master cylinder and booster $38
hatch shocks $8 each
drive shafts $23 each
also i can get heated power leather seats from zj's for $200 complete set(2 front and rear 60/40) theres like 2 or 3 in excellent condition
KP
cr2000xj
NAXJA Forum User
- Location
- Huntsville, Alabama
No gas tank skids? A ZJ one would work for me too, I don't mind having to work a little.
ChuckstrPT
NAXJA Member #791
- Location
- Birmingham, Alabama
You might look under the Postal...If I remember correctly, the Postal TJ came with a D44 rear...and other HD options...I think the alternator and cooling...I wonder in the XJ is the same. I had a buddy buy a postal TJ to wheel...mostly because of the HD options.:viking:
So where is the C4C yard near Birmingham???
So where is the C4C yard near Birmingham???
OlTanNBrown
NAXJA Forum User
- Location
- Midland City, Al.
What year model was the Jeep with the dash view, tan interior, Auto, 2WD. It looks like a newer model than 85. I don't think the console will work as it is setup for 2WD & Auto. I don't think I could even rig my inserts up in it & make it work, but if anyone can enlighten me please do.
thechief86
NAXJA Forum User
- Location
- White House, TN
i'd like to have the bracketry for the high mount alternator... that would be very cool to have. did it have the a/c compressor mounted under it?
look at the belt diagram, the a/c compressor was mounted on the Left side of the engine under the PS pump, kinda nifty, it had long hoses for everything because the heater core was on the left side of the vehicle, note the long heater hoses, and booster hose is like 5' long and runs along the firewall
as you can see here the alternator is the belt adjustment point
and heres the a/c compressor hiding under the ps pump
thechief86
NAXJA Forum User
- Location
- White House, TN
that is cool but i think it'll be a pain in the ass to try to convert mine to that. if the a/c just went under the alternator, that would be ideal. i don't wanna move my a/c to the other side of the motor, just because of all the hose issues...
cr2000xj
NAXJA Forum User
- Location
- Huntsville, Alabama
awesome just keep me posted and i'll pick one up from you when you do
srmitchell
NAXJA Forum User
- Location
- Mckinleyville (Humboldt) CA
Would you ship an entire 5 speed conversion out of a 99? LoL
Minagera
NAXJA Forum User
- Location
- Huntsville, AL
I know pull-a-part in bham has quite a quest C4C, I think 5 of them are XJ's.
ChuckstrPT
NAXJA Member #791
- Location
- Birmingham, Alabama
Thanks!:cheers:
Similar threads
- Locked
