WTB 231 FOR 2000 XJ

[goodwilljeeper]

does anyone know where i can get one on the cheap?

in good order,

possibly with a slip yoke already on it or with it.

 

[Alex E]

I've got a NP231 from a 2000 with an AW4 if you need it, 160k miles. No SYE or fancy stuff, all stock. I looked at PnP prices and they charge 149 plus a 15 dollar core for a 4x4 t case from the San Jose locations. This one will be out this weekend. Let me know, shoot me an offer. You can see it run and wont have to pull it your self.

 

[goodwilljeeper]

Hey thanks. Turns out we were able to fix our problem. If not I would have been all over it! Thanks though

 

[Alex E]

No problem, what issue did yours have?

 

[goodwilljeeper]

Well I have a 242. And it was looking Luke my options for a sye were limited to two and expensive so my math calculated that it would have been cheaper to run a 231 and then sye it. But I was able to flux my angles so the vibe isn't remotely terrible anymore (fingerscrossed)

 

[Goose_XJ88]

Something else that you can try Sam is remove your front driveline to see if that could e causing the vibes. That's the prob I have in my rig. My angles are pretty steep up front and my front pinion u-joint gets eaten up pretty quick.

 

[goodwilljeeper]

Huh, good point. I'll try that today. Thanks man. Never thought about that

 

[Alex E]

For the 242 just get a HNT if you don't want to drop a lot of dough on a SYE. Also check the front ds like was mentioned. Some times try squirting grease into the front splines and see if that helps, those could be worn.

 

[goodwilljeeper]

Alright thanks man! Will do!