Wilmington Ecology, ton of Ford Explores and XJ's

[paulhead]

Well, a few XJ's, more Explorers though and I just paid a $100 too much for an 8.8 :banghead: . These are $275 out the door! Saw a D44 on an XJ too. Murphy's law, they stock the cars when you don't need the parts and vice versa

 

[Wiser]

Well, a few XJ's, more Explorers though and I just paid a $100 too much for an 8.8 :banghead: . These are $275 out the door! Saw a D44 on an XJ too. Murphy's law, they stock the cars when you don't need the parts and vice versa

You're right about that! I'm looking for an 1986 2.5L air filter box. When I had a 4.0L jeep, 2.5L were plentiful, pft not now :banghead:

 

[paulhead]

pretty sure I saw a 4 banger XJ

 

[Wiser]

pretty sure I saw a 4 banger XJ

Thanks for the heads up, may have to take that trip!

 

[the_midwesterner]

Thanks for the heads up, may have to take that trip!

I will seriously pay you good money if you can get the speedo setup off of the NP207 on that thing. I have been looking for over 1+ yr for one, but cant find one.

 

[paulhead]

What's the 207 on?

 

[Wiser]

I will seriously pay you good money if you can get the speedo setup off of the NP207 on that thing. I have been looking for over 1+ yr for one, but cant find one.

I have a 207 in my xj right now, I want to go to a 231. Do you need the tail shaft housing off the 207 or?

 

[Wiser]

What's the 207 on?

I believe 1984-1986 4cyl model with a 5 speed trans

 

[the_midwesterner]

I believe 1984-1986 4cyl model with a 5 speed trans

It's also on the 1984 - early 1987 2.8L models that came with a TF-904 or AX5, before they did the body change to fit the 4.0.

I have a 207 in my xj right now, I want to go to a 231. Do you need the tail shaft housing off the 207 or?

I don't need the whole housing, but the cable and gear driven setup that goes into the tail shaft housing. So, if you have that then yes, I will buy it off you.

I no longer have a mechanical speedo, but I need the whole setup to drive an S-wave pulse generator for my speedometer on my Racepak.

 

[Wiser]

It's also on the 1984 - early 1987 2.8L models that came with a TF-904 or AX5, before they did the body change to fit the 4.0.



I don't need the whole housing, but the cable and gear driven setup that goes into the tail shaft housing. So, if you have that then yes, I will buy it off you.

I no longer have a mechanical speedo, but I need the whole setup to drive an S-wave pulse generator for my speedometer on my Racepak.

Ok, I'm going to PaP tomorrow and if I find one, I'll get it. Pm me your number