Who makes 3 inch Coil Spacers?

[JohnX]

I have a friend with a zj that wants a 3 inch lift....I am almost positive I have seen them before, but can't find them now.

Who makes em?
Where can he buy them?
And are there any difference on the rears vs. fronts?

Thanks.

 

[MENEZES]

ACOS. adjustable to 3 inches and more. dont know that there is a difference between front and rears. Other than the ACOS, i dont think 3 inch spacers exist. but i could be wrong.

 

[xjj33p3r]

You can get JKS ACOS spacers, which are adjustable.

 

[JeepFreak21]

You should try ACOS. They're adjustable for 3+ inches.
HTH,
Billy

 

[JohnX]

ACOS are not an option...for that price he could buy a lift kit. I guess he might just be stuck at 2 inches....poor little fella

 

[XJ_ranger]

ACOS are not an option...for that price he could buy a lift kit. I guess he might just be stuck at 2 inches....poor little fella

ZJ 5.9L coils and WJ V8 "up country" coils should work in a V6 ZJ for about .5-1" of lift - might look into that one...

 

[XJhabitat]

seen it here....idk
http://www.rocky-road.com/xjbudget.html

 

[rstarch345]

What's wrong with using a 2" and a 1" spacer? Maybe not the coolest but they fit together (especially if they are Daystar) and do the job.

Just a thought.

 

[Dookie]

What's wrong with using a 2" and a 1" spacer? Maybe not the coolest but they fit together (especially if they are Daystar) and do the job.

Just a thought.

there's nothing wrong with this at all. just toss a little epoxy between 'em to help keep 'em together, and you're good! easy and cheap.

 

[Wharfrat]

there's nothing wrong with this at all. just toss a little epoxy between 'em to help keep 'em together, and you're good! easy and cheap.

Yes there is.

On a ZJ there is not enough rear spring post for this. He will have to weld in an extension of some sort to keep the rear springs in, even on the road.

 

[Angus]

I have made 3" spacers before out of drill pipe and round cut plate. The drill pipe is easy to find at a steel house, it's almost trash to them. The plate can be cut to make a big washer or you could you a big washer. I do not remember the dimensions, but the washer OD is the same as the pipe/spacer and the ID is the same as the bump stop tower. I am fairly busy so if I if you need more info let me know. I have used this method for daily drivers for years without problems.
Angus