transmission is stuck

[gopher]

im trying to pull the puegot 5 speed out of my truck and it seems to be stuck or something, all bolts are out of the clutch housing and i can even rotate the assembly around nearly upside down, but it wont slide backwards, of the engine, what could be the problem? thanx for any help

 

[satan]

The input shaft engages the pilot pretty heavily on that thing -- could it be that you're not quite pulling it straight back ?

Same thought is that if the bushing wears the shaft (not common) the shaft may end-up with a barb/burr that y-gotta pull through the pilot -- give it the finger (through the shifter hole, I like 5th!) till it's in gear and rotate the output shaft (to rotate the input shaft) as you withdraw the tranny in a straight line from the back of the engine - doing that will help to guide you on what's binding when (stuff'll stop turning freely...) to help you correct you angles or slowly turn the odd-shapes out from each other...

 

[gopher]

thanx, that worked and i got it out and done... everything worked out ok, i think it did have a little bur on that shaft, ohwell. thanx for the help. i like this forum