tires,rims,t-case w sye,roof rack,lift,d44

nismo5

NAXJA Forum User
Location
chico,ca
mods can delete my other posts ill put em all in here

rc 6.5" la lift kit brand new in the boxes $1100
http://roughcountry.com/jeep_xj_6xla.html

xj dana 44 from a 87 xj 3.55 gears with welded spiders and zj disc swap with tj retainer plates,bearings,seals,pads,rotors,e brake hardware and shoes
$500
SA400245.jpg


5 33" ss truxus mt's mounted on pro comp black steel wheels 3 have 75-80% tread left 1 at 90% and one is brand new only bad is one has a little gouge round the side wall like it was spun against a rock not bad though and one has a tear inside the bead because the retards at pepboys didnt lube it good enough before unmounting it and the rims are like brand new all hold air just fine $850
SA400314.jpg

SA400311.jpg


also a 23spline 231 t-case with a sye from a 97 xj
$200
SA400316.jpg

SA400318.jpg


and a con ferr roof rack 5'x4' had flat straps from a bronco hard top for the bottom that i cut off and welded bars in perfect for the xj and a fresh coat of flat black $250 no gutter mounts
SA400315.jpg


all items are located in chico, ca and im pretty firm on price shoot me a pm or gimme a call (530)354-0196 my name is tim

thanks for lookin
 
would you be willing to ship a set of vents? Price w/shipping to 32563?

yeah ill ship the vents on your dime im pretty sure thell fit in a flat rate box so should be around $15 but ill double check tomorrow i have a gold pair and a grey pair which ones do you want?? or does it matter ill post pics of both pair in the mornin just so you can see em
 
Excuse my ignorance, but does the brake swap on the D44 allow use of parking brake or not?

Thanks.
 
Excuse my ignorance, but does the brake swap on the D44 allow use of parking brake or not?

Thanks.

it does allow you to use it you just have to use zj e brake cables or weld on the the xj drum brake parking brake lever to the new setup cause they have different ends heres the link i used except i used tj rubicon retainer plates instead of custom spacers and i used d30 wheel studs cause there a little longer
http://www.madxj.com/MADXJ/technical/technicalfiles/BAzjRearDiscsOnXJ/ZJrearDiscsOnXJ.htm
i havent done anything to the e brake lever yet but i put new shoes and hardware on i wasnt too worried because my xj was an auto
 
Last edited:
im unsure of the mileage i bought it from a buddy of mine who got it off a guy in sac on craigslist it seems to be in good condition its 23 spline i dont know what brand the sye is either theres no logo on it anywhere it doesnt look like its been run since the sye was put in and it seems to be sealed great with grey rtv im coming to sac this weekend if you wanna meet up and check it out
 
just a heads up for everyone too at chico pick n pull theres a high pinion d44 and matching 9" in a 79 f150 five lug and welded wedges and a high pinion non disco d30 with factory 4.10's they usually charge $300 for front axles and$200 for rears but fri-mon is a 1/3 off everything sale
 
Thats ok, its lower on my punch list and funds are tight.. 2.nd, 3rd hand, scares me although it does look nice.. Good Luck selling the goodies:peace:
 
everything has been sold!!! except the hood vents i have two pairs of gold hood vents for sale still $30 each pair shipping on your dime
 
Back
Top