BlueWeasel
NAXJA Forum User
- Location
- Wonderful Colorado Springs
Anyone know how many ft/lbs to torque the starter bolts on a '93 4.0?
Starter bolts torque
- Thread starter BlueWeasel
- Start date
NEWYXJ
NAXJA Forum User
- Location
- Southern Colorado/Northern Wyoming
on a 2000 4.0.
Install both bolts, torque the front bolt to 30 ft lb and then the rear bolt to 35 ft lb.
Sounds strange but that's how the manual reads.
Install both bolts, torque the front bolt to 30 ft lb and then the rear bolt to 35 ft lb.
Sounds strange but that's how the manual reads.
BlueWeasel
NAXJA Forum User
- Location
- Wonderful Colorado Springs
Cool, I've been searching but must be looking in the wrong places. I do not have a manual either. That's not much torque, i would suppose loc-tite is recommended?
NEWYXJ
NAXJA Forum User
- Location
- Southern Colorado/Northern Wyoming
the manual doesn't indicate loctite, but it wouldn't hurt to use some blue.
5-90
NAXJA Forum User
- Location
- Hammerspace
Recommended by FSM? No. Recommended by me? Yes.
I've spent an awful lot of time retorquing starter motor screws - just put #242 (or equivalent) on the threads, torque, and call it a day.
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
Don't forget to clean the threads, Loc-tite hates dirty threads.
