97babyXJ
NAXJA Forum User
- Location
- Metuchen, NJ
I have a pair of Rubicon Express front lower control arms for xj/tj/mj/zj.
They are fixed length, with flex joint on one end.
Were on my xj for about 3 years.
They came with rubicon express's 3.5 inch flex lift.
Joints move smooth, I just greased them up. (tough with your fingers but with a bolt in the joint you can move them around no problem)
Bushings are ok, one bushing has a small crack in it, as noted in picture below.
Paint is scratched and chipped.
No dents or bends at all.
$90 plus shipping.
contact me here, i do check daily.
Thanks,
Ryan
They are fixed length, with flex joint on one end.
Were on my xj for about 3 years.
They came with rubicon express's 3.5 inch flex lift.
Joints move smooth, I just greased them up. (tough with your fingers but with a bolt in the joint you can move them around no problem)
Bushings are ok, one bushing has a small crack in it, as noted in picture below.
Paint is scratched and chipped.
No dents or bends at all.
$90 plus shipping.
contact me here, i do check daily.
Thanks,
Ryan
