DeathValleyPaul
NAXJA Forum User
- Location
- Los Angeles Area
I need some ideas on routing the front locker cable. Right now I have the shifter mounted to the left of the drivers seat even with the front seat, the cable going under the floor, above the slider bar and routed on the inside inner front fender to the Left Front Shock where I have two sets of hose clamps holding it to the stationary part of the shock, then around the knuckle inside, clearing it by 1/2 inch, then over to and down to the front diff. It wants to keep moving and sometimes slides loose and rubs the outer cover against the tire inside.
Someone must have come up with a better way. Has anyone else found that better way. The damn cable is too stiff to flex the way I would really like it to. Has anyone run the electric or air actuator to the front yet? I already have an ARB on the rear, so it is just one more hose!
Someone must have come up with a better way. Has anyone else found that better way. The damn cable is too stiff to flex the way I would really like it to. Has anyone run the electric or air actuator to the front yet? I already have an ARB on the rear, so it is just one more hose!