Rocker Arms/Push Rod or Valve Spring?....see video pls

[BotakBeng]

Here is a video of my Rocker Arm/Push Rod movement.
Only a few has movement.....normal?

Can/should i correct it?

Appreciate if i can get some advice.

 

[Shorty]

not all of your rockers are at the top of a lobe when the engine is at rest-- what you show is normal

 

[BotakBeng]

Understood!
Thx.

Anything I should check while I'm there?

 

[Shorty]

not really, unless you have reason to believe there's something wrong. I've "snugged" the rocker arm bridge bolts when I've had occasion to be under the cover, but I've never actually found one that had backed off.

 

[Talyn]

Is that back to front movement or up and down? If its back to front its normal. If its up and down there is probably a problem.

 

[BotakBeng]

not really, unless you have reason to believe there's something wrong. I've "snugged" the rocker arm bridge bolts when I've had occasion to be under the cover, but I've never actually found one that had backed off.

All tight and snugged! :thumbup:

Is that back to front movement or up and down? If its back to front its normal. If its up and down there is probably a problem.

Here is a video of the up+down movement.

Problems?

 

[Talyn]

That could be normal depending on how hard you pulling up. The lifter could be a bit soft with the engine off and how long it has sat. It looks like it is giving you some resistance, so thats good.

 

[BotakBeng]

That could be normal depending on how hard you pulling up. The lifter could be a bit soft with the engine off and how long it has sat. It looks like it is giving you some resistance, so thats good.

Thank you! ::