Project Geosynchronous Orbit

[MoparManiac]

Hangs too low, cut it off, make a new a bumper, scrap the comanche, buy a corolla.

Why do you always have the best ideas?

 

[ROBZ95Xj]

looks like i cant wheel with you now, i do not allow welded on recovery points, only ones attached with non graded home depot bolts

 

[MoparManiac]

What if I use a non graded 5/8" bolt instead of a hitch pin?

 

[kastein]

I don't think home depot stocks 5/8" nylon bolts. You won't pass tech without them and you will have to stay at camp and drink all the beer.

 

[ROBZ95Xj]

What if I use a non graded 5/8" bolt instead of a hitch pin?

only if its pink with purple poke a dots

 

[foxwar71]

What if I use a non graded 5/8" bolt instead of a hitch pin?

I got a stick of 5/8" allthread that I'll be using for link bolts, I should have enough extra for you :gee:

 

[billyjp2]

What if I use a non graded 5/8" bolt instead of a hitch pin?

Much more elastic than grade 8, I like where you're going with this.

 

[XJLI]

I don't think home depot stocks 5/8" nylon bolts. You won't pass tech without them and you will have to stay at camp and drink all the beer.

new plan for me

 

[REWSTER]

nice build, ive had it up all day having to take breaks reading so my A.D.D didnt kick in.

looks good cant wait to see it done

 

[MoparManiac]

nice build, ive had it up all day having to take breaks reading so my A.D.D didnt kick in.

looks good cant wait to see it done

Thanks, appreciate it!

I can't wait to see it done either :laugh:

 

[MoparManiac]

Added some mondo gussets (~5"x5") to support the bumper and then went crazy with paint.

Picked up some 1.5 x .250 DOM from Ross so ill be moving back to the front axle tomorrow night.

 

[MrSimon]

Sheesh, thats like a quarter inch of paint on there.

 

[MoparManiac]

Haha yeah I laid on two light coats of self-etching primer, and two thick coats of Rustoleum Hammered black on the bumper, and just one coat of Rustoleum on the frame rails

 

[foxwar71]

Picked up some 1.5 x .250 DOM from Ross so ill be moving back to the front axle tomorrow night.

Seller's alert, this buyer sucks at producing the cash upon pick up.

 

[MoparManiac]

Seller's alert, this buyer sucks at producing the cash upon pick up.

Buyer alert, no working ATMs around this seller, and he also doesn't take Paypal.

What year is it again?

 

[foxwar71]

Cash is king, not my fault your ghey citizens bank stuff doesn't work. What's your excuse when you bought tube off me a couple of weeks ago and didn't pay me, lighting was bad? Sun was in your eyes? Half of an arm up your ass?


Until then, I own your truss

 

[XJLI]

CITIZENS BANK!

dont talk to sam about that place. we found out that there are no citizens banks west of PA.... in california.

 

[MoparManiac]

Did no one else work on their junk tonight?

Got the ram mount tie-ins done. Cast area came out like crap due to some gaps but I'm over it. Also paint up the high steer arms, but no pics of that.

Tomorrow I'm probably gonna work on either the track bar or coil mounts.

 

[eflores]

Did no one else work on their junk tonight?

Got the ram mount tie-ins done. Cast area came out like crap due to some gaps but I'm over it. Also paint up the high steer arms, but no pics of that.

Tomorrow I'm probably gonna work on either the track bar or coil mounts.

i dont know what youre building but it looks like the secksiest diving board eva!

 

[vetteboy]

Did no one else work on their junk tonight?

God, no. But I'll probably drive it around tomorrow a little bit.

Nice gap around the cast part, I'm glad we left that clearance space for thermal expansion...wait...what? :dunce:

Coming along nicely. I can't wait to nerf you at Line Mountain. :firedevil