yossarian19
NAXJA Forum User
- Location
- Grass Valley, CA
I read the instructions in my FSM and it appears straightforward. Just to double check, thought I'd ask -
With 2.5" lift, will I run into any issues removing the pan with all four wheels on the ground?
Did the factory use chemical sealant / will I be using the BFH to separate this thing?
I'm considering replacing the oil pump and RMS while I'm in there. Anything else to have a look at / freshen up?
Slowly making my way through the list of things that leak... I think this oil pan gasket is making the top of the list pretty quickly
With 2.5" lift, will I run into any issues removing the pan with all four wheels on the ground?
Did the factory use chemical sealant / will I be using the BFH to separate this thing?
I'm considering replacing the oil pump and RMS while I'm in there. Anything else to have a look at / freshen up?
Slowly making my way through the list of things that leak... I think this oil pan gasket is making the top of the list pretty quickly