Oct 8th worksheet

[rredalty]

For those attending, this is just to give some order so hopefully we can get this done in a timely manner. Please add to this if you are attending or have something else in mind...

1. trail rate this -
2. rredalty & Tiff- Headliner
3. jeepgeek2002
4. PacificEd -
5. bigalpha & wife -
6. Dave92cherokee-
7. 256offroad and fiance-
8. FlexdXJ-
9. High2by and MrsHigh2by -
10.Rusty and Gina,-
11. Jason(polar jeep 04) and Sean(bwfdrums)-



To be done...
*Remove and reinstall front axle
*Remove front suspension and install lift/ trac bar and tierod
*Remove rear suspension and install new leafs, shackle relocation brackets
*Remove old and busted front sheetmetal and install new hotness
**I'm sure there is more to be added to the list and as of right now, the general concensus is to leave the 2wd trans and case in it until all the parts are there and laid out to verify we have everything that is going to be needed to get it going the same day.

 

[256offroad]

I added what ill volunteer.

also dont forget about bumper and sliders. (assuming they will be there by the 8th)

For those attending, this is just to give some order so hopefully we can get this done in a timely manner. Please add to this if you are attending or have something else in mind...

1. trail rate this -
2. rredalty & Tiff- Headliner
3. jeepgeek2002
4. PacificEd -
5. bigalpha & wife -
6. Dave92cherokee-
7. 256offroad and fiance-*Remove and reinstall front axle
*Remove front suspension and install lift/ trac bar and tierod
8. FlexdXJ-
9. High2by and MrsHigh2by -
10.Rusty and Gina,-
11. Jason(polar jeep 04) and Sean(bwfdrums)-



To be done...
*Remove rear suspension and install new leafs, shackle relocation brackets
*Remove old and busted front sheetmetal and install new hotness
**I'm sure there is more to be added to the list and as of right now, the general concensus is to leave the 2wd trans and case in it until all the parts are there and laid out to verify we have everything that is going to be needed to get it going the same day.

 

[Zingerxj1129]

1. trail rate this -
2. rredalty & Tiff- Headliner
3. jeepgeek2002
4. PacificEd -
5. bigalpha & wife -
6. Dave92cherokee-
7. 256offroad and fiance-
8. FlexdXJ-
9. High2by and MrsHigh2by -
10.Rusty and Gina,-
11. Jason(polar jeep 04) and Sean(bwfdrums)-
12. Zingerxj1129 (Allen)

 

[FlexdXJ]

For those attending, this is just to give some order so hopefully we can get this done in a timely manner. Please add to this if you are attending or have something else in mind...

1. trail rate this -
2. rredalty & Tiff- Headliner
3. jeepgeek2002
4. PacificEd -
5. bigalpha & wife -
6. Dave92cherokee-
7. 256offroad and fiance-
8. FlexdXJ-I'll do what I can, I'm kinda limited on what I can do but i'm good with wiring.
9. High2by and MrsHigh2by -
10.Rusty and Gina,-
11. Jason(polar jeep 04) and Sean(bwfdrums)-



To be done...
*Remove and reinstall front axle
*Remove front suspension and install lift/ trac bar and tierod
*Remove rear suspension and install new leafs, shackle relocation brackets
*Remove old and busted front sheetmetal and install new hotness
**I'm sure there is more to be added to the list and as of right now, the general concensus is to leave the 2wd trans and case in it until all the parts are there and laid out to verify we have everything that is going to be needed to get it going the same day.

 

[jeepgeek2002]

If i can send those Sliders out ... some one will have to get these nuts, bolts and washers:

Description
Quantity
UM
WSHR, FLAT, 1/2", ZINC
6
EA
WSHR, FLAT, 1/4", ZINC
48
EA
NUT, LOCK, 1/4-20 W/NYL INSERT
48
EA
CPSCR, HEX, 1/2-13 X 1.5", GRD 5
6
EA
CPSCR, HEX, 1/4-20 X 1.25",GRD 5
48
EA
NUT, NYLOCK, 1/2 - 13
6
EA
BOLT, SLOTTED, HEX HEAD, SELF-TAPPING
6
EA



or The bracket kit is part number 67928, the hardware kit (nuts/bolts) is part number 67929The bracket kit is part number 67928, the hardware kit (nuts/bolts) is part number 67929

 

[POLAR_JEEP_04]

Mark us down for the rear suspension. We will be tired from the drive down.

 

[FlexdXJ]

I can handle the Hellas since its still fresh in my mind from last night!

 

[dave92cherokee]

Looks like the trans and t/c will be there so i'll help out in swapping it out.

 

[clrusty]

we are headed to pick up the jeep at EOR at 8am and headed your way Ed..cant wait to seee everyone next weekend..

 

[dave92cherokee]

Ed was wondering if you have a pressure washer? That way we can spray the trans and t/c down with some cleaner and then clean it off before we install it. I can pick up a jug of cleaner from oreilly's on the way up there.

 

[rredalty]

it will be clean when it arrives

 

[Cottontail]

I can bring my pressure washer if we need one. Just let me know and I'll get it ready.

 

[FlexdXJ]

I'll have an angle grinder, soldering iron and other Misc handy stuff in the back of the Jeep.

 

[clrusty]

yea ya might want to bring the pw so it can be cleaned all over..lol. the jeep is sitting at Eds..man that thing runs good,shifts good, and i love Eds place down there..Nice place Ed.

 

[bigalpha]

I'm a terrible mechanic but I can stand around and tell you how to do things.

 

[FlexdXJ]

I'm a terrible mechanic but I can stand around and tell you how to do things.

You must be a union worker....I'm good at that too!

 

[bigalpha]

You must be a union worker....I'm good at that too!

Not union, but that's what people who can't do things do.

 

[FlexdXJ]

Not union, but that's what people who can't do things do.

Hahaha, we'll learn ya!

 

[PacificEd]

I don't have a pressure washer. It might come in handy.

 

[High2by]

I can bring my pressure washer if we need one. Just let me know and I'll get it ready.

If you do bring the PW, I may borrow it to wash out the engine bay on the ole MJ.