my wj knuckle research

[XJEEPER]

It appears that Moog lists two lower ball joints for the WJ. One is adjustable. Which did you choose?
FNF

non adjustable, but I have already rotated my knuckles so I had no need

 

[userbmx1315]

is there a way to run my stock 98 unit bearings?

 

[aparke4]

i ran my stock 99 bearing when I had my 30 with the WJ set up - used JKS spacer - worked fine with and without spidertrax spacers

 

[userbmx1315]

the 99 is diff from the 98.

 

[NEWYXJ]

the 99 is diff from the 98.

My research indicates that the unit bearing changed sometime in 99 and could have 98 & older or 00 and newer.

I have not done the WJ knuckle and brakes yet, but if I understand my research-

98 and older unit bearing use the knuckle spacer and spacers on the calipers to align with the rotors.

00 and newer unit bearings use the knuckle spacer, but do not need spacers on the calipers to align with the rotors.

Someone please correct me if I've got this wrong.

 

[souske]

non adjustable, but I have already rotated my knuckles so I had no need

I havent seen Adj. lowers, but am considering ADJ upper balljoints. Have not rotated my inner C's, but trying to get this steering as modern feeling as possible with the WJ swap. Anything else I am forgetting?