Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Just changed the drivers side motor mount (broken) wanted to change pass. side. Do you have to remove the oil filter adapter housing to get the long bolt out?
Since you are pulling the oil filter adaper off, it is a good idea to pick up the set of 3 O-rings that go in it from the dealership. When i pulled mine out they were pretty brittle.
When I changed mine out, I did not remove the oil filter adapter. It is much easier to remove the (2) bolts and (1) torx bolt under the mount. This will remove the entire mounting assembly from the block. Just be sure to support the motor with a floor jack and a block of wood. Don't lift the motor with the jack, just support it. Hope this helps...