More Stuff for Sale

[over2land]

Well, I need to clear out my spare bedroom... I'm out of space in the garage. Buy stuff!!! The pics are links because some of the images are pretty big.

Used Currie Currectlync, straight, never been hit, tight tie rod ends, stabilizer included (used)- $200
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575794.jpg

'97 XJ plastic gas tank with swapped in TJ vent valve (its up there on that shelf)- $100
http://pic20.picturetrail.com/VOL1600/472481/9384595/328581493.jpg

Speedometer and bezel ('67 IIRC rhino grilled wagoneer)- $40
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575997.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576046.jpg

Heater controls from same Wagoneer- $40
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576014.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576028.jpg

Misc late model XJ dash components and panels, including air bags, switches (ignition, turn, etc) and heater componants- request a part and make an offer
(more items than just what is pictured)
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575816.jpg

Lightly used, but in box Autometer Phantom Fuel Gauge. The box says it is PN 5714, but I'm not sure that is accurate, and not sure how to test that. I know on a '94 YJ it reads backwards. http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM-5714&N=700+115&autoview=sku - $20
http://pic20.picturetrail.com/VOL1600/472481/9384595/328581508.jpg

Also have a grey, early style XJ overhead console, with electrical plugs. - $80
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575770.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576649.jpg

1-inch drop pitman arm for XJ. Brand new in bag. I'm sure it'll work for YJ/TJ, but no idea what difference is from stock- $50
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575971.jpg

Poison Spyder Customs high steer Dana 44 arm. Never used... but might have been bolted up and looked at. New $124, this one, $60
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575909.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575881.jpg

Superior Axle axle shaft... I've had this so long, I don't remember what Jeep it was for. It was a Dana 44 front application. I don't remember which one. I think I was keeping it as a spare for my YJ. 15 7/8 inches from the center of the u-joint to the end of the splines. $50
http://pic20.picturetrail.com/VOL1600/472481/9384595/328575871.jpg

Dana 70 5.86 Gears new in box, and complete setup kit, new in box. Make an offer.
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576702.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576758.jpg

Rugged Ridge upper soft door YJ windshield frame seal. It is the plastic thing that bolts to the windshield, the top hardware attaches to, and the rubber seal sits against. Bought for a project that went another direction. I have both sides. $20 each.
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576722.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576733.jpg

XJ rear overhead sound bar. Removed from a '97, but I don't see why it wouldn't go into any XJ without a sound bar. $50
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576673.jpg

427 cuin Tall Deck Big Block. Pulled from a Power line truck with 85,000 on the odometer. Pulled 2 years ago, ran when removed. This was to be the motor I put in my 715, but I'm strongly leaning towards diesel now... and I have no where to put it. It has been kept inside until today when I took these pictures. Some dents in valve covers from handling, but nothing major. All holes were covered with tape during storage. Its in the back of the 715 now... I have no where to put it really that it won't be in the way. Can easily meet you in Santa Clarita... other places with a little more difficulty. $500
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576821.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576778.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576880.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328576910.jpg

All items are OBO. Don't be afraid to PM me with offers.

Yes, we can knock some money off if you'd wanna combine items.

I'll be in LA Monday, then around Santa Clarita Tues/Wed... possibly heading into LA again on Thurs, if you want to meet up for any of these things.

 

[over2land]

Oh, just found these too... doubt you guys would care, but throwing it out there.

Hard upper doors for YJ (87-95) lower steel half doors. They are obviously intended to work with a hard top, but since I don't have a hard top I don't need them, nor can I fit them. They look like the Bestop units that are on sale here for $899.99. http://www.quadratec.com/products/11195_317_07.htm The seals on the ones I have are there, but not all the way. but will need to be glued back on. I don't know if they are Bestop units... there are no Bestop markings on them, but I don't know of anyone else making these. I got them because I have a factory hardtop that I had this pipe dream of bringing from NJ to CA. I'm giving up on ever reuniting my hardtop with my Jeep, so I'm selling my upper doors. Asking $400 OBO
http://pic20.picturetrail.com/VOL1600/472481/9384595/328594922.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328594895.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328594956.jpg
http://pic20.picturetrail.com/VOL1600/472481/9384595/328594994.jpg

 

[RobertF]

Interested in the Currie Currectlync.
PM you when I get home from work.

 

[erikwylie]

Interested in the sound bar!
PM Coming!

 

[over2land]

PM back

 

[AppleValleySlim]

I'll give you $100 for the sound bar!




Ride'on,

~C!~

 

[erikwylie]

I'll give you $100 for the sound bar!




Ride'on,

~C!~

Go for it found one else where cheaper!:moon:

 

[AppleValleySlim]

I didn't need it anyway.




Ride'on,

~C!~

 

[erikwylie]

I didn't need it anyway.




Ride'on,

~C!~

Way to be a douche!!!

 

[swbooking]

dibs on the hi-steer arm. Lemme talk to my cousin and ill get back to you Pete.

 

[over2land]

I got a guy off Craigslist wanting the high steer arm with a possible meet on Thurs.

Let me know though... would take precedence.

 

[swbooking]

If you already got a guy looking at it thats cool man. If it falls through let me know though.

 

[over2land]

Well, you know how Craigslist is...

Guy contacts you, says he's interested, and you don't hear from him for a week.

 

[mikedashg]

second in line for the currie steering.

 

[silverslk]

Well, you know how Craigslist is...

Guy contacts you, says he's interested, and you don't hear from him for a week.

I think its jeep people. Everything I sold on Craigslist (nitrous express kit and wheels/tires) has sold to the first person who called.

Either way, Good luck bro.

 

[over2land]

I've had a lot of feelers and PMs... but no one popping up with cash ready to go.

I'm going to be listing this stuff on ebay this weekend. Thanks for all the interest and PMs on it. I need this stuff out of my bedroom.

 

[RobertF]

PM'd you.

 

[over2land]

Sorry Robert... I thought I'd updated this thread.

The Currie Steering is gone.... everything else is up for grabs still.

 

[598BBC]

are you firm on the hard uppers for the YJ. Thanks:shhh: