gird123
NAXJA Forum User
- Location
- minden, nv
I'm an idiot. I have a 2001 xj. I installed a header because I had an exhaust leak, after installation I felt like my cherokee did not have quite as much power so I was wondering if all of my injectors were firing because I noticed a few had cracked insulation(i did not have a check engine light). I started the engine and pulled the first connector to injector #1. The engine started running like crap. I plugged the connector back in and it kept running like crap. I turned off and turned on and it still runs like crap and throws the 0201 and 0301. I replaced the connector and the injector. I pulled and checked the spark plug. I checked the ground and it has continuity between the injector connectors.
Is there a pin on one of the other connectors i could check to see if there is a break somewhere else in the injector connection #1 to connector power?
How can I check to see if the spark plug is getting spark? It was before i pulled the connector.
If the two wires from the connector made contact what else could be fried?
Can i drive it to work? Any other thoughts.
Thank you for the advice.
Is there a pin on one of the other connectors i could check to see if there is a break somewhere else in the injector connection #1 to connector power?
How can I check to see if the spark plug is getting spark? It was before i pulled the connector.
If the two wires from the connector made contact what else could be fried?
Can i drive it to work? Any other thoughts.
Thank you for the advice.
Last edited: