Million Post March. When will NAXJA reach 1 million posts?

[Glenn B]

Million Post March. When will reach 1 million posts?
Post here with your guess, thoughts, randon stuff.. Follow the rules, including:

• No SPAM

• No Porn

• No personal attacks

• Do not harrass non Members. If they have more than 50 posts, they shoulda joined by now anyhow.

• See the Forum Rules for any other issues BEFORE you post.

• Be sure to showcase the virtues of becoming a Member

• Do NOT do a post of simpley smiley's to be a smart ass. Rancho is not a smiley sponsor, so... NO.

• Serious about the rules. Stick by them. If you post in this thread, and your sig violates the rules, it will be fixed for you.

• Have fun. Lets get to 1 million posts.

Be random, have fun. Act a fool, and your posts may be deleted by a Mod. As always, Mods decisions are final and not open to debate.

Do not be the fool that ruins this thread.

 

[JoesXJ]

TWO

 

[5-90]

If you mean 1 million posts in total, I'm sure we're already there (I've done my part - I've got over 6K by now, I'm fairly sure...)

Or, do you mean just in one thread? That would be interesting - but I'd like to hear Glenn weigh in on this first - I don't want to create any more server/list admin headaches for him (but a thread with one million posts would be interesting, and I don't think it's been done before... What say you, Glenn?)

5-90

 

[JoesXJ]

http://www.big-boards.com/board/1727/

....sure, now i get it.

http://www.big-boards.com/board/1727/

 

[Glenn B]

If you mean 1 million posts in total, I'm sure we're already there (I've done my part - I've got over 6K by now, I'm fairly sure...)

Or, do you mean just in one thread? That would be interesting - but I'd like to hear Glenn weigh in on this first - I don't want to create any more server/list admin headaches for him (but a thread with one million posts would be interesting, and I don't think it's been done before... What say you, Glenn?)

5-90

Look at the stats at the bottom of the forum. We are not there yet.
Posts: 870,101

This is Glenn, Jon. Carry on.

 

[Geepfreak]

TWO

Two what?:dunno:

 

[Glenn B]

Two what?:dunno:

Two bee?

 

[Geepfreak]

Two bee?

Ahhh, I get it now..
That is all...

 

[5-90]

Look at the stats at the bottom of the forum. We are not there yet.
Posts: 870,101

This is Glenn, Jon. Carry on.

I had a hunch - the factoids started clicking into place after I hit the "commit" button...

Here's another! Some part of me would still like to see a single thread with a million (civil!) posts in it, tho. I honestly don't think it's been done before...

Oh - did you get a chance to check out my torque charts yet, or are you still busy? If you like them, just let me know what -specific formatting I should apply (backgrounds, colours, and such) and I can work up a second set for here.

5-90

 

[Geepfreak]

I am currently taking a break from doing a rear-main seal,, it's being a PAIN, pan won't drop off....

 

[IXNAYXJ]

Two bee?

Or not to bee....

-----Matt-----

(In on the first page!!!)

 

[5-90]

Use a stiff putty knife, and start working from the passenger front corner (a bent screwdriver also comes in handy, for getting the corner started.)

I've gone so far as to take a stiff putty knife and grind a slight knife edge (not sharp, just a two-sided bevel) just for this job - and it makes it rather easier to get to, once you get it started...

I've just done an oil sump as part of my transmission swap (it was leaking anyhow, and I was down there anyway...) and that idea still works well...

5-90

 

[Glenn B]

I had a hunch - the factoids started clicking into place after I hit the "commit" button...

Here's another! Some part of me would still like to see a single thread with a million (civil!) posts in it, tho. I honestly don't think it's been done before...

Oh - did you get a chance to check out my torque charts yet, or are you still busy? If you like them, just let me know what -specific formatting I should apply (backgrounds, colours, and such) and I can work up a second set for here.

5-90

I think a million posts in one thread would kill the systems. Sorry.

Yes, I saw the torque charts... you let me slip tooo long, and I forget the deal. But generally if it is excell and you export it to html, it can be used. Even better if you grab the naxja header image and make a "ready to publish" page type thing. I am working on the FAQ stuff.... so that may fit in as well.

 

[Geepfreak]

Use a stiff putty knife, and start working from the passenger front corner (a bent screwdriver also comes in handy, for getting the corner started.)

I've gone so far as to take a stiff putty knife and grind a slight knife edge (not sharp, just a two-sided bevel) just for this job - and it makes it rather easier to get to, once you get it started...

I've just done an oil sump as part of my transmission swap (it was leaking anyhow, and I was down there anyway...) and that idea still works well...

5-90

Thanks Jon..!

 

[ECKSJAY]

IN before Glenn complains of storage space, server load, and bandwidth.

 

[Glenn B]

Made thread a "sticky". Lets go......

 

[Glenn B]

IN before Glenn complains of storage space, server load, and bandwidth.

I have replaced that glen guy. Some of you may know of me from JU? I am storydude there.

 

[5-90]

I think a million posts in one thread would kill the systems. Sorry.

Yes, I saw the torque charts... you let me slip tooo long, and I forget the deal. But generally if it is excell and you export it to html, it can be used. Even better if you grab the naxja header image and make a "ready to publish" page type thing. I am working on the FAQ stuff.... so that may fit in as well.

I thought as much - but it was worth asking.

I'm not exporting from Excel (I get all sorts of artifacts that way that bloat the filesize...) I just hand-code directly into tables. I use Excel for archiving and sorting, but I don't like the way it generates HTML.

I can either send you the raw HTML files - you apply formatting, post them, and send me copies to maintain and update, or you tell me (specifically) what you'll want for here, I apply it, and send you the HTML to post (or you just tell me where to post it.) I can also change links around without too much trouble (advantage of hand-coding - you know how everything works, no?) to complement the FAQ/Tech Archive here as well.

I've got a few more that want doing before I'm out of FSMs, and I'm always on the lookout for manuals I don't have. Also, I've taken the data from the "condensed chart" at the back of each section - one of these days, I want to go through each FSM and get the "in-between" data that doesn't make it to the back.

Natch, I'll only convert the XJ-specific pages, unless you want the ones for YJ/TJ, the 1995ZJ, and the 1969 DJ-5A...

I can also convert the bolt chart I'm working on for -spefiic formatting (I don't think I've coded that yet...) and I've got a sticky up in OEM tech asking for more OEM bolt/screw sizes, so I can add them to the list. Same deal there - I use Excel for admin, and hand-code into HTML.

Let me know, hm?

5-90

 

[Beej]

Million Post March. When will reach 1 million posts?
Post here with your guess, thoughts, randon stuff.. Follow the rules, including:

• No SPAM

• No Porn

• No personal attacks

• Do not harrass non Members. If they have more than 50 posts, they shoulda joined by now anyhow.

• See the Forum Rules for any other issues BEFORE you post.

• Be sure to showcase the virtues of becoming a Member

• Do NOT do a post of simpley smiley's to be a smart ass. Rancho is not a smiley sponsor, so... NO.

• Serious about the rules. Stick by them. If you post in this thread, and your sig violates the rules, it will be fixed for you.

• Have fun. Lets get to 1 million posts.

Be random, have fun. Act a fool, and your posts may be deleted by a Mod. As always, Mods decisions are final and not open to debate.

Do not be the fool that ruins this thread.

Always with the steadfast clinging to rules, eh?

So what are we supposed to do?

:dunno:

 

[Dirt]

three?