Alright guys, here are few more photos of the stereo install. I didnt take as many photos as I should have but you get the idea. If you have any questions let me know.
This is how the jeep looked for a week or two
New speaker wire ran under the trim at the rear of the headliner. Went through the back to the crossover which is now tucked up inside the soundbar behind the speaker
Ran the wires down the c pillar, behind the trim, to the amp mounted on the drivers side trunk wall
The front speaker wires were ran down the door sills under the trim pieces and up through the stock door grommets. The front component crossovers are mounted inside the door panels.
Completed
Rear speakers are covered by the stock grilles
I still need to pull the door panels off and check out what the tweeters are hitting. Something behind them is pushing them out not allowing the tweeter cups to sit flush. I will do this once the weather is nice and Im not on crutches and a leg brace.
I dont ever want to do another 4ch amp/new speaker wire/speaker install again. It was frustrating and a ton of work but I did actually get it to look nice and clean like I wanted.
Here is the trunk as of now, I plan on building a tool box that will match the dimensions of the sub box as well. Thats one of the next projects I will get to.
Id also like to get my windows tinted now that I have some expensive equipment in the jeep. The less thats visible the better.
On a slightly different note, I ordered a 2002 Suburban rear view mirror off ebay. It has a compass and temp sensor I plan on hooking up. should be here in the next few days.
Thanks for looking
arty:
