- Location
- Thornton, CO
Got the housing back today. Need to find the time now to get the gears installed. Maybe if I'm lucky I'll have this thing rebuilt before the 1 year anniversary of the breakage..............
Makin' Progress!
- Thread starter Kittrell
- Start date
tonesxj
NAXJA Forum User
- Location
- Loveland, CO
Re: !Makin' Progress
Better get that arb in quick.. Before I snag it!:eyes:
Better get that arb in quick.. Before I snag it!:eyes:
- Location
- Thornton, CO
Re: !Makin' Progress
Hope ya have 33 spline shafts to go with it..................
tonesxj said:
Hope ya have 33 spline shafts to go with it..................
tonesxj
NAXJA Forum User
- Location
- Loveland, CO
Re: !Makin' Progress
I'll take it all..:clap:
Looks good DJ. I really need to get my gears and lockers in the new rig.
I'll take it all..:clap:
Looks good DJ. I really need to get my gears and lockers in the new rig.
- Location
- Thornton, CO
Re: !Makin' Progress
You don't call, you don't write. I don't even know what the new rig is.
You don't call, you don't write. I don't even know what the new rig is.
tonesxj
NAXJA Forum User
- Location
- Loveland, CO
Re: !Makin' Progress
05 LJ.. Dare I say on this board. I'll get you some pics.
05 LJ.. Dare I say on this board. I'll get you some pics.
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
Re: !Makin' Progress
about time
about time
- Location
- Thornton, CO
Re: !Makin' Progress
That is the sex............
tonesxj said:
That is the sex............
jdogg4
NAXJA Forum User
- Location
- Evans Colorado.
Re: !Makin' Progress
so how long was it gone and what did you have done to it?
so how long was it gone and what did you have done to it?
- Location
- Thornton, CO
Re: !Makin' Progress
Sand Blasted and Powder Coated, 'bout a week.
Sand Blasted and Powder Coated, 'bout a week.
Re: !Makin' Progress
It's about time... Geez DJ you have been messing around with that thing for long enough. Everytime I go over to Troy's he has to trip over that dam thing to get me parts... Good to see you might get it done... Haven't you been down since I towed your rig in to CO last year???
It's about time... Geez DJ you have been messing around with that thing for long enough. Everytime I go over to Troy's he has to trip over that dam thing to get me parts... Good to see you might get it done... Haven't you been down since I towed your rig in to CO last year???
- Location
- Thornton, CO
Re: !Makin' Progress
Then ya didn't go over very often..................
I haven't been "down" since then, but yes, I've been 2wd ever since then. We swapped in a D35 to get me back on the road. And I cringe everytime I glance at it. On all three of my XJs, I never had a D35, they all came factory 8.25. So it was a sad day when I actually had to swap one in. So yeah, it's taken a while. So my only goal at this point is to have it in before the April Chinamans run. And even then, probably won't have the locker hooked up.
Caged94XJ said:
Then ya didn't go over very often..................
I haven't been "down" since then, but yes, I've been 2wd ever since then. We swapped in a D35 to get me back on the road. And I cringe everytime I glance at it. On all three of my XJs, I never had a D35, they all came factory 8.25. So it was a sad day when I actually had to swap one in. So yeah, it's taken a while. So my only goal at this point is to have it in before the April Chinamans run. And even then, probably won't have the locker hooked up.
planefixer
NAXJA Forum User
- Location
- Colorado Springs, CO
Re: !Makin' Progress
You mean like your axle(s) I was tripping over in Coop's shop (that have been there forever)? Fawking hypocrite.:roflmao:
Caged94XJ said:
You mean like your axle(s) I was tripping over in Coop's shop (that have been there forever)? Fawking hypocrite
.:roflmao:
Last edited:
jdogg4
NAXJA Forum User
- Location
- Evans Colorado.
Re: !Makin' Progress
how much did that run ya. I'll be bringin in mine here to the shop to sandblast it but I'm not going the PC direction. We use some HD epoxy's here at the shop with big time UV ratings and I'm going to have the guys hit it with that stuff. Same as my bumpers and rockers.
91 Jeep Project said:
how much did that run ya. I'll be bringin in mine here to the shop to sandblast it but I'm not going the PC direction. We use some HD epoxy's here at the shop with big time UV ratings and I'm going to have the guys hit it with that stuff. Same as my bumpers and rockers.
- Location
- Thornton, CO
Re: !Makin' Progress
$35 to Blast, $70 to Coat.
jdogg4 said:
$35 to Blast, $70 to Coat.
jdogg4
NAXJA Forum User
- Location
- Evans Colorado.
Re: !Makin' Progress
and the rocks thats going to take that all off FREE!
70 dosen't sound all that bad really.
Sand blasting here cost me a case of bush light.
and the rocks thats going to take that all off FREE!
70 dosen't sound all that bad really.
Sand blasting here cost me a case of bush light.
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Re: !Makin' Progress
LOL! Ouch.........
planefixer said:You mean like your axle(s) I was tripping over in Coop's shop (that have been there forever)? Fawking hypocrite
LOL! Ouch.........
jdogg4
NAXJA Forum User
- Location
- Evans Colorado.
Re: !Makin' Progress
I like DJ's slow pace makes me look fast at jobs.
I like DJ's slow pace makes me look fast at jobs.
Re: !Makin' Progress
My axles at Coop's shop aren't in the way... I hid them under a International Scott... And we all know that thing will never move... :laugh2:
planefixer said:You mean like your axle(s) I was tripping over in Coop's shop (that have been there forever)? Fawking hypocrite
My axles at Coop's shop aren't in the way... I hid them under a International Scott... And we all know that thing will never move... :laugh2:
- Location
- Thornton, CO
Re: !Makin' Progress
The ARB and Gears are in, almost there. Just need shafts now (temp backorder with USA), and to have the brake lines made up...................:clap:
The ARB and Gears are in, almost there. Just need shafts now (temp backorder with USA), and to have the brake lines made up...................:clap:
