Looking for a Ford 9"
- Thread starter CNew
- Start date
fatwreck
NAXJA Forum User
- Location
- ottawa, il
Try posting in the wanted section of colorado4x4.org for a housing....don't spend more than $150 on one though. The 3rd member with 4.xx gears could possibly be found on pirate4x4.com.
Writeup for mine is here:
http://www.projectxj.com/mods/ford9inch.htm
Writeup for mine is here:
http://www.projectxj.com/mods/ford9inch.htm
Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
CNew said:
I Pm'd you. I have exactly what you want I think.
- Location
- Port Orchard, WA
Big Red said:I Pm'd you. I have exactly what you want I think.
except 4 states away.... :confused1
Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
XJ_ranger said:
Forward Air shouldn't be too much, probably under $150 since I had my brother-in-law's bolt in modded hp44 full width axle shipped from Raleigh, NC to Sacramento, CA for $180.
- Location
- Port Orchard, WA
Big Red said:
so 150 plus whatever you want for it?
I bought mine for 175 and think i paid too much...
Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
XJ_ranger said:
This is my last post regarding this axle in this post.
It is a Early Bronco Ford 9" app. 60" wms to wms. 31 spline Moser alloy axle shafts, 4.88 gears, spool, 5 on 4.5 bolt pattern and modified (spring perches/shock mounts) to bolt into a XJ. So as you can see Opie, it's not exactly a stock 9" and yes you did pay too much for a stock full width 9", you can get those for around $100 or less just about anywhere. Good day Sir.
Troy
kemosabee
NAXJA Forum User
- Location
- Pagosa Springs,CO
Big Red said:This is my last post regarding this axle in this post.
It is a Early Bronco Ford 9" app. 60" wms to wms. 31 spline Moser alloy axle shafts, 4.88 gears, spool, 5 on 4.5 bolt pattern and modified (spring perches/shock mounts) to bolt into a XJ. So as you can see Opie, it's not exactly a stock 9" and yes you did pay too much for a stock full width 9", you can get those for around $100 or less just about anywhere. Good day Sir.
Troy
Do you still have the axle? What were you looking to get for it?
Similar threads
