Looking for a 29 spl 8.25

[djblade311]

Hi guys,

I'm looking for anyone local who has a 29 spl 8.25 handy? Looking for a complete axle. missing shafts are ok since I have a spare.

PM me

Thanks Josh

 

[xjjeeper19]

I have a housing out of a jeep liberty....still has all the brackets on it, I was going to use it for myself, but I got a smoking deal on an 8.8. I think it is about and inch wider, backing plate to backing plate.....25 bucks and you can have it...I don't need it

 

[GrimmJeeper]

i dont have the housing but ive got the 3rd member with decent bearings on it you're welcome to it if you want it josh

 

[djblade311]

preferably, looking for an XJ 8.25 so I dont have to do much with the perches. a complete axle is ideal. thanks tho

 

[ktarro]

got one in 92231, complete just missing drums and brake pads... make an offer will accept trades..

 

[sintax]

i dont have the housing but ive got the 3rd member with decent bearings on it you're welcome to it if you want it josh

8.25's had 3rd members?

 

[GrimmJeeper]

8.25's had 3rd members?

i just call it a 3rd member now because everyone i know looks at me like a tard when i call it a carrier.

 

[sintax]

I'd call'er a loaded open carrier =P

 

[djblade311]

its really called a carrier. 3rd members are used on Toyotas, Ford 9s, Curries.

THese are 3rd members

it could be a traclok carrier. Those clutches were hidden pretty well on mine until I took it apart and a clutch ring fell out.

 

[xjjeeper19]

That's an open carrier...no trac-lok

 

[GrimmJeeper]

i know what to call it im ASE certified for christs sake. i already explained i called it the 3rd member becuase every moron that comes into my parts store calls it a 3rd member and im just used to calling it that. excuuuuuuuse me.


anyways, josh - i had to go to AMC auto salvage right next to ecology today because i couldnt find a window. i know he has multiple 8.25s there, if you can get him to sell you just the housing cheaper than the whole thing i'll give you the carrier i have for free, just make sure he gives you the bearing caps that hold the carrier in. heres the number if you want it, 310-830-6880 its off of avalon and lomita, right past the ecology yard. he's usually a little pricey but if you need it, he's got it.

good luck
-mike

 

[djblade311]

i know what to call it im ASE certified for christs sake. i already explained i called it the 3rd member becuase every moron that comes into my parts store calls it a 3rd member and im just used to calling it that. excuuuuuuuse me.

-mike

well then you should correct all those morons. :lecture:

Thanks for the info! I'll check with them. It might be hard for me to get up there but we'll see

 

[djblade311]

btt