JCR sliders

[1990JEEPXJ]

i had posted about my JCR stage II sliders before but i have changed them and now they are equivalent of stage I sliders. i cut off the tube on the outside. i also used the self tappers for something else. i did not grind the slider where i cut off the tube and you would need to buy some self tappers. the pinch seam bolts are still on them. when i first installed them the pinch seam mount was pretty hard to get to line up. i had to lift the side of the jeep by the mount to get the mount high enough. just a little grinding and some bolts and you have some good sliders. im thinking $60. id prefer local pick up. ill post pics when i get a chance

 

[eflosd]

I'm interested. Post pics when you can

 

[1990JEEPXJ]

will do

 

[1990JEEPXJ]

Here's a picture of how it looks

 

[1990JEEPXJ]

Old thread. New bump

 

[travisk]

JCR sliders have different variations for certain long arm kits. Do you know if these are standard or for any particular kit?

 

[1990JEEPXJ]

I am unsure of that. I bought them used so you would have to ask JCR. They are a few years old at this point. I only used them with drop brackets. Did not use them with frame stiffeners either

 

[travisk]

Can you measure the distance between the ends of the slider and the support beams?

 

[4x4 XJ]

I ll take them..when can I pick them up...

 

[4x4 XJ]

Are they still available????

 

[1990JEEPXJ]

Can you measure the distance between the ends of the slider and the support beams?

the front of the slider to the support beam is about 2.5"

the rear of the slider to the support beam is 17"

the mounting brackets are about 32" from inside to inside.

 

[4x4 XJ]

When are you available, to pick up the sliders..

 

[1990JEEPXJ]

Sold to travisk