It's not a jeep: 1982 Volvo 240 Coupe with 5.0L Ford V8 swap w/ 5spd

Wildmatt

NAXJA Forum User
Location
Buxton, ME
I figured since it has a dana 30 rear end, someone here might want it.....


Well... this car has countless hours of my time and lots of my money. The car screams. Please let me know if you have any questions.

Specs:

1982 Volvo 242 Coupe
5.0L Ford V8
Aluminum Heads with 220cc intake runners
Custom cam (.509 / .532 lift 222 / 232 duration)
Stainless steel roller rockers
9.8:1 Compression
Victor Intake
Everything port matched
Headman Headers
Edlebrock 750 Electric Choke Carb
ARP hardware
t5 5spd
IPD 25mm/25mm roll bars
IPD Rear adjustable Panhard Bar
IPD Rear Adjustble Torque arms
MSD 6AL Ignition
Custom dual 2.5" Exhaust

Car was from Georgia originally and is in good shape. Pics show 2 worst areas on car. Car needs a paintjob.

Located in Manchester NH - $3500 or trades? This is an EXTREMELY fair price, I am only asking what I have into the driveline.

Haters.... keep your comments to yourself.
The interior is a little taken apart at the minute, I just finished tidying up the wiring, I have all the trim bits.
Volvo%201%20%28Large%29.jpg

Volvo%20Engine%202%20%28Large%29.jpg

Volvo%20Interior%20%28Large%29.jpg

Volvo%20Engine%203%20%28Large%29.jpg

Volvo%20Engine%201%20%28Large%29.jpg

Sunroof%20%28Large%29.jpg

New%20Suspension%20%28Large%29.jpg

Drivers%20Side%20%28Large%29.jpg

Drivers%20Door%20%28Large%29.jpg
 
I had three early 80's Volvo's and they were geat rides and super easy to work on. Kudos on the swap.
How will that pass inspection/ emissions...not too familiar with the NH procedures.
 
91Woody said:
I had three early 80's Volvo's and they were geat rides and super easy to work on. Kudos on the swap.
How will that pass inspection/ emissions...not too familiar with the NH procedures.

It should not be a problem. There isn't emissions testing on vehicles this old, and other then that it is just a safety inspection.
 
Back
Top