- Location
- Southwest IN
https://www.ironrockoffroad.com/product/58-heavy-duty-over-the-knuckle-steering-xjtjzj.html
**This system does not work with OEM wheels. Wheel spacers or wheels with less than stock backspacing (4.5" maximum backspacing) are required.**
Complete setup, ready to bolt on in the campground and go. Current heims were installed before Moab and are Barnes units. Full price offer I will include a pitman arm that is already drilled out, all hardware and all spare (used) heims I kept for trail spares. Might even throw in a 5/8" drill bit of unknown sharpness.
$300 black letters
$250 red letters
Note: this is still on my Jeep. I'll pull it off for a committed buyer, otherwise I'll run it at WF.
IF YOU BUY AND PLAN ON CAMPGROUND INSTALL: knuckles will need drilled out to 5/8"; bring a drill. Installation not included.
**This system does not work with OEM wheels. Wheel spacers or wheels with less than stock backspacing (4.5" maximum backspacing) are required.**
Complete setup, ready to bolt on in the campground and go. Current heims were installed before Moab and are Barnes units. Full price offer I will include a pitman arm that is already drilled out, all hardware and all spare (used) heims I kept for trail spares. Might even throw in a 5/8" drill bit of unknown sharpness.
$300 black letters
$250 red letters
Note: this is still on my Jeep. I'll pull it off for a committed buyer, otherwise I'll run it at WF.
IF YOU BUY AND PLAN ON CAMPGROUND INSTALL: knuckles will need drilled out to 5/8"; bring a drill. Installation not included.
Last edited:
