Intermittent hard start/stalling

[hubs97xj]

The 97 FSM uses the abbreviations CMP and CKP for the camshaft and crankshaft position sensors. CPS is not used.

 

[Pelican]

The Jeep FSM may not use "CPS" but a quick session with google suggests that the rest of the automotive world does on occasion. You will find CPS and CKP regularly used for crank or crankshaft position sensor along with CAS for crank angle sensor.

 

[Ecomike]

The 97 FSM uses the abbreviations CMP and CKP for the camshaft and crankshaft position sensors. CPS is not used.

99% of the posts on call it a CPS, not a CKP and have done so for at least 7 years.

 

[CTeunuch]

Who gives a **** what you call it as long as we're all on the same page?

 

[Talyn]

You obviously aren't.

 

[CTeunuch]

You obviously aren't.

Whoa there hotshot, just because I asked for some input on my Jeep I'm not on your level? I was merely trying to get people to stop bickering over acronyms, which seems pretty pointless. I appreciate your input about the problem, but lose the attitude, it's only the internet.

 

[billyjp2]

had the same exact issue on maegens 96. It turned out to be a weak battery. I swapped out a ton of sensors before i figured it out.

 

[adrnalinlovr]

Weak batteries are huge, especially grand Cherokees. Most sensors will still run at 10.5 11v but def a slight weak battery causing the alternator to work harder and more fluctuation of voltage in the system will affect sensors.