Interior mods

ryan6838 said:
playwithit what seats are thoughts?
Click to expand...

Mastercraft made them for the military. I think they are used in the MRAP. I got them through a seller in Florida that specializes in military surplus. Got a steal but shipping cost were a little steep.

I had the brackets made and used all the stock mounting locations. They are on slides and have allot of travel. Turned out nice for me being 6' 4". Here's a few more pictures of the install.
Decisions
100_2732.jpg


Mounts
100_2747.jpg


All the way back
100_2770.jpg


The XJ they are in
100_2774.jpg
 
RescueGreenXJ said:
I started off using those just to make the holes, but realized it was just as easy to use e screws that come in the package. You just have to make sure you tighten them straight. Screw the first one in one of the upper corner holes tight so it holds the handle straight, the take your time screwing the others in. I just added one more handle on the other side. They work awesome to hang D-rings off of. I hung some 50ft electric extension cord with an "S"-clip off one of them. I still love it.
Those screws that come with it are solid. I pulled on each of the handles, and they aren't going anywhere.
When I first bought the handles at HD, there was another model with just two holes, but I decided on the 4-hole on because it would be stronger.....kinda how I justified using the screws that come in the bag...

Thanks.


RescueGreenXJ.wordpress.com
Click to expand...

Any support in the back? nuts or washers?
 
hubs97xj said:
I'm pretty sure there's another thread about that mount, or a similar one, but I can't find it yet. Was it Pro.fit?

edit- Found it. Disco'ed now, but there are still a few around. http://www.naxja.org/forum/showpost.php?p=244972263&postcount=4
Click to expand...

Not help for you 97-01 guys but this is how I mounted my GPS. I fabb'ed a piece of aluminum into a clamp type mount. I used one factory screw to secure in place. WSolid and works like a charm. Pictures should help understand.
IMG_6747.jpg


IMG_6749.jpg


The bracket goes over the top of the dash (not shown).
 
Interior storage mods? How's this.
100_5648.jpg


100_2562.jpg
 
playwithit said:
Mastercraft made them for the military. I think they are used in the MRAP. I got them through a seller in Florida that specializes in military surplus. Got a steal but shipping cost were a little steep.

I had the brackets made and used all the stock mounting locations. They are on slides and have allot of travel. Turned out nice for me being 6' 4". Here's a few more pictures of the install.
Decisions
100_2732.jpg


Mounts
100_2747.jpg


All the way back
100_2770.jpg


The XJ they are in
100_2774.jpg
Click to expand...

Can you share the vendor?


RescueGreenXJ.wordpress.com
 
shhuskins said:
BrackeTron makes that bracket, in fact they are on clearance right now I just bought 3 at $1.99 a piece and they work great hope this helps
Click to expand...

I went on the website...sure enough they have them on clearance marked down from $39.99 to $1.00....however you're required to input your type vehicle and Jeep is the only make that says it's an additional $18.00. Poop.
 
samger2 said:
I went on the website...sure enough they have them on clearance marked down from $39.99 to $1.00....however you're required to input your type vehicle and Jeep is the only make that says it's an additional $18.00. Poop.
Click to expand...

Yeah...and cherokee is not an option for the model of jeep on their site.
 
My goal is to keep my XJ looking OEM+...

Factory Dodge Ram RBK stereo - got me a disc player plus a changer port for my ipod
2122166654_1edbdce124_b.jpg


Infinity Aftermarket Speaker upgrade
2794204724_a233f6cd3c_b.jpg


Rear Headrests using spare front seat headrests
2729458451_29a254d3e8_o.jpg


Infinity OEM tweeters - from XJ Limited
6698008829_3a891689f1_o.jpg


OEM Driver's side grab handle
6698026579_b230b34c66_o.jpg


Hi-Lift Jack - Mount tied to rear seatbelt anchors (now painted to match interior). This is a smaller Hi-Lift cut to fit space. Running 2" lift with 30's.
1847236026_eec6982bd4_o.jpg


Wimpy fire extinquisher - needs replacing
1867412890_20a428c1ec_o.jpg
 
I got my fire extinguisher mounted today and was wondering. I want to get my stream light base mounted. It's has a 12v adapter and I was wanting to cut the plug off and jist splice into the cigarette kighter that is on the ignition so when the jeep is running it would charge the light and spare battery. But my ? Is if I would plug something else into that cigarette lighter while my light was plugged in would it be drawing too much and blow a fuse. Or would it be like plugging one of those splitters in.

Here is the base
IMAG0113.jpg
 
you need to find out how many amps it draws, or just try it and find out. If you do it right all that will happen is you'll blow a fuse if you draw to much current, then you'll know :looney:
 
You must log in or register to reply here.

Similar threads

T
Steering Wheel Swap and Aftermakret Cruise Switch
Replies
3
Views
230
TxBxSx
T
RagnarTheDakotan
2001 Jeep Cherokee Classic New Build
Replies
3
Views
91
Anak
Anak
G
1996 Cherokee XJ Stock For Sale
Replies
0
Views
150
gundog
G
T
Death wobble after WJ swap
2
Replies
30
Views
720
Jeepedo129
Jeepedo129
U
1993 Jeep XJ
Replies
3
Views
217
Unclewolverine
U
Back
Top