Interior mods

[RescueGreenXJ]

Started this on another forum, and thought I'd try it here as well....any pics of interior storage mods, post 'me here.....

Here's mine:

www.rescuegreenxj.wordpress.com



RescueGreenXJ.wordpress.com

 

[GrimmJeeper]

I don't much care for those types of mag light mounts for the sole reason that one has come out of it's mount in a rollover and tagged me in the back of the head. Digging the carabiner mounted supplies though, nice idea :thumbup:

 

[ehall]

that is a good idea, might steal that one

I found a bunch of Chevy Tahoe tie-down brackets at the junkyard and went crazy with them.

First the cargo floorpan, taking care to miss the gas tank

Then the back of the rear seat, after reinforcing it

Then the hatch panel, with lights and 6x9 speakers

Bunch of other mods but that is on-topic for what we are talking about here

 

[dcampbell98XJ]

do you have a write up for how you did the speakers and lights in the hatch? iv been wanting to do that. i go to alot of concerts and tailgating isnt the same without speakers in the hatch

 

[Logans91XJ]

I would like to know as well where you got the lights from?

 

[Brent T]

Link to my Hi-Lift under the back seat mount.

http://www.naxja.org/forum/showthread.php?t=1069995

 

[aintright]

those lights look like any white trailer light you can get at a truck stop or tractor supply

 

[RescueGreenXJ]

that is a good idea, might steal that one

I found a bunch of Chevy Tahoe tie-down brackets at the junkyard and went crazy with them.

First the cargo floorpan, taking care to miss the gas tank

Then the back of the rear seat, after reinforcing it

Then the hatch panel, with lights and 6x9 speakers

Bunch of other mods but that is on-topic for what we are talking about here

Very nice.....awesome...


RescueGreenXJ.wordpress.com

 

[souske]

Hey rescuegreenxj: signature lines are only for club members
Thanks

 

[rockclimber]

Here is what I came up with for mounting my ARB switches.

I used an ARB flush mount bracket with the 90* tab cut off and a couple extra holes in it.

This sheetmetal panel is behind the dash panel, and here's the dash panel we notched as well.

The paint didn't quite come out how I wanted it to, but I ran into a time constraint so I will go back over it when I get a chance.

 

[4BigMeats]

Some interesting stuff

 

[Dozer11B]

I can't find my camera anywhere or else I would post pics. I don't usually carry a lot of people in my jeep so I folded the back seats down and layed my 31 in spare at a slant (like a pick up bed mount). The tire leans in beatween the front buckets on the folded up seat bottom. Then I strapped it down to the seat hardware just inside the rear doors with a ratchet strap. I stow a cheater bar, two shovels, tarp and wool blankets under the tire.

The cargo area has my tools and fluids. The cargo area and back seat area are seperated by a Rangler cargo barrier net.

I need tyo find my camera- this probably sounds like Swahili....

 

[ChevelleSSLS6]

do you have a write up for how you did the speakers and lights in the hatch? iv been wanting to do that. i go to alot of concerts and tailgating isnt the same without speakers in the hatch

...right... my hatch trim is ???? after I busted the clips off removing the thing. I figured that since it doesn't contribute to getting the Jeep to the end of the trail, it's unnecessary. However, having a rockin' sound system (minus a big ol sub box that I had for about 3 months, and producing copious amounts of 'ghetto rattle') is nice for the road trips.

 

[davidson99XJ]

do you have a write up for how you did the speakers and lights in the hatch? iv been wanting to do that. i go to alot of concerts and tailgating isnt the same without speakers in the hatch

x2!!! thats awesome. if you have a write up please share or pm me.

 

[ehall]

This is how I did the speakers -- http://www.naxja.org/forum/showpost.php?p=244474725&postcount=214

This is how I did the lights -- http://www.naxja.org/forum/showpost.php?p=244475115&postcount=215

I did some of the structural and wiring modifications earlier. For example, I enlarged the hole for the wire harness, and then used a door jamb bootie to run the wire bundle.

Sorry for the slow pic loading, my server host is setup for text data and pics overload the bandwidth very quickly

 

[Talyn]

Do you have any reinforcement under these or just a nut?

 

[souske]

I used a large fender washer and a nylock nut under mine, when I copied ehalls use of chevy tiedowns

 

[Dozer11B]

Here's what I got for a solution to carrying my 31" spare. Once I get my roof rack mounts off the roof and onto the gutter I will probably put it up on my rack. Ultimately I want a nice tire swing bumper...

Here is my rear cargo area. The barrier net adds some piece of mind in a collision/rollover. Tool bags and such are pretty heavy!

 

[tj'sxj]

nice net, what is it or did u get it? i would still run a strap over the top of ur tools ect in the back!

 

[ehall]

Do you have any reinforcement under these or just a nut?

The rear bolts go through the rear leaf bucket. I don't remember what I did with the fronts. I'm sure you can figure something out