DirtyMJ
NAXJA Forum User
- Location
- Prince George, BC
I need it bad. Who'd have thought a full spooled front would make it hard to turn the tires...?
Before anybody reads farther, is there a good writeup on here? I didn't run across one, other than BrettM being el-cheapo.
This is for my D44...
So, as far as ram sizing goes, the norm is to use an 8" stroke? This is plenty? A buddy of mine used a 10" for both of his setups; saying that 8" is not enough for a D44. Thoughts? I'm assuming that a 1.5"-1.75" stroke is near ideal? And as far as a push rod? 1"?
And anybody got a picture of where to drill/tap the box?
Before anybody reads farther, is there a good writeup on here? I didn't run across one, other than BrettM being el-cheapo.
This is for my D44...
So, as far as ram sizing goes, the norm is to use an 8" stroke? This is plenty? A buddy of mine used a 10" for both of his setups; saying that 8" is not enough for a D44. Thoughts? I'm assuming that a 1.5"-1.75" stroke is near ideal? And as far as a push rod? 1"?
And anybody got a picture of where to drill/tap the box?