wild1joker
NAXJA Forum User
- Location
- fayettville,nc
i'm in the process of replacing my clutch because of a leaking slave cylinder. (under warranty at autozone) whole clutch kit. kit #1619.They double checked and all years,all kits have the same pilot bearing. Anyway the pilot bearing included in the kit is the wrong size. my transmission input shaft O.D is 3/4 inch and the pilot bearing in the kit is approx. 5/8 inch id. the pilot bearing in my transmission has the # sce 1210 stamped on it . The number stamped on the bottom of my trans housing is 20503383. there is a sticker on top of the trans # 53009528. no other numbers at all. The pilot bearing outer diameter will not fit inside the adapter in the crankshaft . I have a 93 cherokee 4x4 country. my engine is dated oct 1992. 4.0 liter. Thanks to all who care to help.:dunno: