Jeffro600
NAXJA Forum User
- Location
- Cheyenne, Wy
How long are they typically lasting you and how high are they cranked up? Seems like i went through my last couple bottles at an alarming rate...
Guys with 80CF AR/C02 sheilding gas bottles...
- Thread starter Jeffro600
- Start date
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
I use 120CF Aluminum tanks on both my MIG & TIG.The Mig gets used "alot" around here,I fill it up about 2 times a year.I normally run about 20-24CFH.
CRASH
NAXJA Forum User
- Location
- Foresthill, CA
80 cubic foot tank, at a rate of 20 cubic feet per hour, equals 4 solid hours of welding.
bj-666
NAXJA Forum User
- Location
- Rhode Island
u turn the gas of when your done using it right?:laugh3:
Jeffro600
NAXJA Forum User
- Location
- Cheyenne, Wy
bj-666 said:
Yeah it gets turned off after each use, it just seems like the last bottle i used went WAY too fast. I normally run about 20CFH and the last one didnt seem to last more than maybe 2 hours worth of welding.
Im getting it filled tomarrow...guess i should check for leaks.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Are you turning it all the way on when using it?
Highlander
NAXJA Forum User
- Location
- Newport News, Va
when you get it back take a cup of dawn or other type of dishwashing soap and a cup o water. Mix the two and spray the whole valve down... If it's leaking you'll know...
Then do all the fittings on your regulator and lines.. You might find something there!
Then do all the fittings on your regulator and lines.. You might find something there!
