Front End Part FT

VAhasnoWAVES

NAXJA Forum User
Location
Lake City, Mi
Want to start a project that will make these obsolete. So my spares are for sale for a little funding.

All parts are BNIB.

(2) Timken brand unit bearings: $75 each
TREs: pitman arm, and both ends of tie rod: $10 each
Drag link: $25

Willing to do better for red members. Shipping can be arranged. Would really prefer trades.

- WJ knuckles (calipers and brackets not needed)
- Ford D44 stuff (need everything from the stub and spindle out)
- offer

Walt
Located in mount pleasant mi
Text or call is good: 757 646 5173
 
If you have a new solid inner tie rod for the driver side (ZJ, not the hollow tube XJ) and a new drag link to pass knuckle, I'd take both of those at WF... And subsequently install them Friday afternoon...
 
hey walt...

trade ford d44 flat top knuckles that are drilled and tapped for hi steer for unit bearings?

they are bolt knuckles so they will accept ford 5 bolt spindles and you can use 8 lug hubs if you want. lemme know
 
If you have a new solid inner tie rod for the driver side (ZJ, not the hollow tube XJ) and a new drag link to pass knuckle, I'd take both of those at WF... And subsequently install them Friday afternoon...
You'll need a new adjuster too. I think I may have one laying around. PM me and we can iron out details. I'll need to look and see if I have the adjuster.
hey walt...

trade ford d44 flat top knuckles that are drilled and tapped for hi steer for unit bearings?

they are bolt knuckles so they will accept ford 5 bolt spindles and you can use 8 lug hubs if you want. lemme know
The problem with that is that they won't bolt onto the D30. There is a tread in the mod tech that I'd like to recreate. So what I need is ford stubs, and everything from the spindle out. All 1/2 ton stuff.
I can deliver to winterfest if needed
Gracias.
 
You'll need a new adjuster too. I think I may have one laying around. PM me and we can iron out details. I'll need to look and see if I have the adjuster.

The problem with that is that they won't bolt onto the D30. There is a tread in the mod tech that I'd like to recreate. So what I need is ford stubs, and everything from the spindle out. All 1/2 ton stuff.

Gracias.

gotcha...thought you were building a 44...nvm
 
Back
Top