I recently picked up a couple of led touch switches (Pilot PL-SW55BR), to control some driving lights. After installing them, the switches themselves turned on, but would not turn on the lights. I substituted on old rocker switch for the touch switch to double check my wiring and the lights worked.
The switches are 12v 1amp, and are connected through relays. Is it possible that a 1amp switch is not supplying enough current to trigger the relays?
I was really hoping to use the switches because they look really slick installed in the "dummy" gauge panel.
The switches are 12v 1amp, and are connected through relays. Is it possible that a 1amp switch is not supplying enough current to trigger the relays?
I was really hoping to use the switches because they look really slick installed in the "dummy" gauge panel.