Only In A Jeep XJ
NAXJA Forum User
- Location
- Greenville, Texas
I am converting from a hp d30 disco to a hp d30 non-disco. What all are good parts to keep off the disco as trail spares?
D30 Spare parts
- Thread starter Only In A Jeep XJ
- Start date
Bender
NAXJA Forum User
- Location
- Cambridge, Ontario
Everything is the same except the passenger side shaft as long as they are both from the same year range...i.e. up to 1990, 91-95, 96+
If they are from different year ranges the parts from the knuckle out could be different.
What year are your two axles?
If they are from different year ranges the parts from the knuckle out could be different.
What year are your two axles?
Only In A Jeep XJ
NAXJA Forum User
- Location
- Greenville, Texas
87 disco 3.55 gear
86 non disco 4.10 gear
I'm replacing the cv style shafts with ones from an 05 tj but keeping the cv shafts as trail spares just wondering what all other parts to keep. Already took the hubs and Lt side shaft. Is there any thing else that should be kept? the new axle was pretty much bare so brakes and steering linkage are being reused.
86 non disco 4.10 gear
I'm replacing the cv style shafts with ones from an 05 tj but keeping the cv shafts as trail spares just wondering what all other parts to keep. Already took the hubs and Lt side shaft. Is there any thing else that should be kept? the new axle was pretty much bare so brakes and steering linkage are being reused.
Last edited:
